General safety information Contents | Liebherr 7084000-01, 20707

General safety information

Contents
1	General safety information	2
2	Setting up the appliance	2
3	Changing the door hinges	3
3.1	To detach the soft stop mechanism	3
3.2	Reversing the door	3
3.3	Re-attaching the soft stop mechanism	3
4	Kitchen Cabinet Construction	4
4.1	Kitchen Cabinet Airflow	4
4.2	Designing the Kitchen Cabinet	5
4.3	Designing the Kitchen Cabinet Doors	6
5	Water supply	8
6	Installation	8
6.1	Assembling the appliance	9
6.2	Fitting the unit doors	11
7	Connecting the appliance	13

The manufacturer is constantly working to improve all models. Therefore please understand that we reserve the right to make design, equipment and technical modifications.

To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.

The instructions apply to several models, so there may be differences. Sections which only apply to certain appliances are indicated with an asterisk (*).

Instructions for action are marked with a , the results of action are marked with a .

1 General safety information

Read and follow these instructions. They contain safety advice which is important for safe and problem-free installation and operation. Always read and follow the safety advice.

		DANGER		indicates a hazardous situation,
				which if not avoided, will result in
				death or serious injury.

		WARNING		indicates a hazardous situation,
				which if not avoided, could result in
				death or serious injury.

		CAUTION		indicates a hazardous situation,
				which if not avoided, will result in
				minor or moderate injury.

		NOTICE		indicates a hazardous situation,
				which if not avoided, could result in
				damage to property.


		Note		indicates useful advice and tips.

It is important that the guidelines and instructions in this manual are followed so that the appliance is correctly

installed and operates properly. Read and understand all information in this manual before the appliance is installed.

2 Setting up the appliance

WARNING

Risk of fire due to moisture!

If live parts or the power cord get wet, this can cause a short circuit.

u The appliance is designed for use in enclosed spaces. Do not operate the appliance in open space or in damp areas or where there is spray.

WARNING

Danger of fire and damage!

u Do not place devices that give off heat, e.g. microwaves, toasters, etc. on the appliance.

CAUTION Risk of personal injury!

u Have two people move this appliance into place.

NOTICE

Risk of damage caused by condensation

Installing the appliance next to any other refrigerator or freezer can cause damage or condensation to the Liebherr appliance.

u Do not install this appliance next to any other refrigerator or freezer except another Liebherr model. Liebherr models are designed to allow side-by-side installation. They are equipped with a heating system to eliminate condensation when refrigerators or freezers are installed side-by-side.

NOTICE

Risk of damage for the finished floor surface!

u Protect the finished floor surface before you uncrate the unit.

Verify that:

q the floor under the appliance is flat and level.

q the floor can support the appliance's weight plus approximately 1200 pounds (544 kg) of food weight.

q the appliance is not placed in direct sunlight or near the stove, range top, radiators and similar heat sources.

q the kitchen cabinet that the appliance is installed in is shimmed to the floor level if the floor heights are not equal.

q cutout dimensions are accurate.

q electrical outlet is in correct location.

q the air flow is not restricted. Air flow must be provided for the appliance to operate properly. The factory air vents provide 31 square inches (200 cm2) of air flow per appliance. If you are replacing the air vents with an overlay, the air flow must be the same or greater than the factory air vents.

20707, 7084000-01, HC 1001/1050, HC 1011/1060 specifications

The Liebherr HC 1011 and HC 1060, along with the HC 1001 and HC 1050, represent a significant advancement in hydraulic crane technology. These models are designed for optimal performance, versatility, and efficiency in various lifting applications, making them indispensable in construction and industrial settings.

One of the key features of the Liebherr HC series is their exceptional lifting capabilities. The HC 1011 and HC 1060 are designed with robust hydraulic systems that provide impressive load capacities. These cranes can lift heavy materials with precision, allowing for efficient operation on job sites that require the moving of substantial loads. The HC 1001 and HC 1050 offer similar advantages, ensuring that projects can be completed smoothly and without unnecessary delays.

Technological innovation is a hallmark of Liebherr products, and these cranes are no exception. They feature advanced control systems that facilitate easy operation, enabling both experienced operators and those new to crane operation to work effectively. These systems also include safety features that prevent overloads and ensure stable lifting, reducing the risk of accidents on the job site.

The ergonomic design of the operator’s cabin in the HC series enhances comfort and visibility, enabling operators to maintain focus during operation. The cabin is equipped with user-friendly controls and displays, ensuring that vital crane functions are easily accessible. This design consideration is critical for maximizing productivity while minimizing operator fatigue.

Another significant characteristic of the Liebherr HC series is their durability and maintenance efficiency. Constructed with high-quality materials, these cranes are built to withstand the rigors of demanding work environments. Moreover, Liebherr has designed the cranes with accessibility in mind, making routine maintenance straightforward and quick, which minimizes downtime.

With features such as a modular design, these cranes can be customized to meet specific operational needs. Liebherr provides a range of attachments and accessories that enhance the versatility of the HC 1011, HC 1060, HC 1001, and HC 1050, allowing them to perform a variety of tasks beyond standard lifting operations.

In summary, the Liebherr HC 1011/1060 and HC 1001/1050 cranes combine power, technology, and durability to deliver a top-tier lifting solution. Their sophisticated features, safety mechanisms, and ergonomic design make them ideal for modern construction and industrial projects, ensuring that users can rely on them for both efficiency and safety in their lifting tasks.