Liebherr HC 1001/1050, HC 1011/1060, 7084000-01, 20707 Connecting the appliance

Page 13

Connecting the appliance

7 Connecting the appliance

WARNING

Electrical shock hazard!

u Start-up should only take place once the appliance has been installed according to these instructions.

u Electrically ground appliance. u Do not ground to a gas pipe.

u Check with a qualified electrician if you are not sure the appliance is properly grounded.

u Do not have a fuse in the neutral or grounding circuit. u Do not use an extension cord or a multiple socket. u Do not use a power cord that is frayed or damaged.

WARNING

Electrical shock hazard!

This appliance is equipped with a three-prong (grounding) polarized plug for your protection against possible shock hazards. Electrical Grounding Required.

u Do not remove the round grounding prong from the plug. u Do not use a two-prong grounding adapter.

-Wait 30 minutes up to 1 hour after installation before you plug in the appliance. This allows the refrigerant and system lubrication to reach equilibrium.

-Make sure incoming voltage is the same as the appliance rating. A 110-120 Volt, 60 Hz, 15 Amp electrical supply (20 Amp for side-by-side installations) circuit that is controlled by a circuit breaker or fuse is required.

-We recommend using a dedicated circuit for this appliance to prevent electrical overload.

-Follow all Federal, State and local electrical, fire and building codes and ordinances when installing the receptacle and / or the appliance.

-In some communities, a wall switch is required to turn power to the appliance ON and OFF.

-To reduce the risk of fire, electric shock, or personal injury, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction.

-You are advised to clean the appliance before switching it on the first time (see Cleaning).

-The top of the electric outlet must be located within 82-5/8 in. (2100 mm) from the top of the base in the cabinet.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation Instructions General safety information General safety information ContentsSetting up the appliance To detach the soft stop mechanism Changing the door hingesReversing the door Re-attaching the soft stop mechanismKitchen Cabinet Airflow Kitchen Cabinet ConstructionDesigning the Kitchen Cabinet Electrical outlet Power cord Level Fish line for power cordDesigning the Kitchen Cabinet Doors Height of the refrigerator door panel is Water supply InstallationAssembling the appliance All appliances For appliances with a fixed water supply for the IceMakerTo slide the appliance in and align it With 5/8 16 mm thick unitFor a 23-5/8 600 mm wide recess Fitting the unit doorsFor a 24 609.6 mm wide recess For chipboard doorsFasten the appliance door to the unit door with screws For large unit doorsConnecting the appliance Connecting the appliance

20707, 7084000-01, HC 1001/1050, HC 1011/1060 specifications

The Liebherr HC 1011 and HC 1060, along with the HC 1001 and HC 1050, represent a significant advancement in hydraulic crane technology. These models are designed for optimal performance, versatility, and efficiency in various lifting applications, making them indispensable in construction and industrial settings.

One of the key features of the Liebherr HC series is their exceptional lifting capabilities. The HC 1011 and HC 1060 are designed with robust hydraulic systems that provide impressive load capacities. These cranes can lift heavy materials with precision, allowing for efficient operation on job sites that require the moving of substantial loads. The HC 1001 and HC 1050 offer similar advantages, ensuring that projects can be completed smoothly and without unnecessary delays.

Technological innovation is a hallmark of Liebherr products, and these cranes are no exception. They feature advanced control systems that facilitate easy operation, enabling both experienced operators and those new to crane operation to work effectively. These systems also include safety features that prevent overloads and ensure stable lifting, reducing the risk of accidents on the job site.

The ergonomic design of the operator’s cabin in the HC series enhances comfort and visibility, enabling operators to maintain focus during operation. The cabin is equipped with user-friendly controls and displays, ensuring that vital crane functions are easily accessible. This design consideration is critical for maximizing productivity while minimizing operator fatigue.

Another significant characteristic of the Liebherr HC series is their durability and maintenance efficiency. Constructed with high-quality materials, these cranes are built to withstand the rigors of demanding work environments. Moreover, Liebherr has designed the cranes with accessibility in mind, making routine maintenance straightforward and quick, which minimizes downtime.

With features such as a modular design, these cranes can be customized to meet specific operational needs. Liebherr provides a range of attachments and accessories that enhance the versatility of the HC 1011, HC 1060, HC 1001, and HC 1050, allowing them to perform a variety of tasks beyond standard lifting operations.

In summary, the Liebherr HC 1011/1060 and HC 1001/1050 cranes combine power, technology, and durability to deliver a top-tier lifting solution. Their sophisticated features, safety mechanisms, and ergonomic design make them ideal for modern construction and industrial projects, ensuring that users can rely on them for both efficiency and safety in their lifting tasks.
Top Page Image Contents