Liebherr 7084000-01, HC 1011/1060, HC 1001/1050, 20707 Designing the Kitchen Cabinet Doors

Page 6

Kitchen Cabinet Construction

w The floor and side walls must be at right angles to each other.

The joint between the upper and the lower kitchen cabinet door must align with the joint between the upper and lower appliance door.

Follow distance L to the wall to allow the drawers to be pulled out properly.

u Follow the dimensions provided in Fig. 6.

4.3Designing the Kitchen Cabinet Doors

Fig. 7

You need two doors for the kitchen cabinet, one on top for the refrigerator compartment, and one on the bottom for the freezer compartment.

In general, the doors have these characteristics:

-The doors should be at least 5/8 in. (16 mm) and max. 3/4 in. (19 mm) thick to allow the connecting rails to be fastened to them.

-With both doors closed, there should be a minimum of 1/8 in. (3 mm) between the upper and lower doors.

-Also, there should be an 1/8 in. (3 mm) clearance between the upper door and the cabinet door above it (if any).

-The width of the cabinet doors depends on the kitchen style and size of the gaps between the door panels of the cabinetry. Generally, a 1/8 in. (3 mm) vertical gap between the cabinet doors is recommended.

-The top edge of the upper door Fig. 7 (1) and lower door Fig. 7 (2) should be even with the doors of adjoining cabinet(s), if any.

-The position of the joint between the kitchen cabinet doors must be level with the position of the joint Fig. 7 (2) between the appliance doors.

-Adjust the door alignment before installing the appliance. It is impossible to adjust the door with the appliance installed.

Check the installation dimensions according to Fig. 6.u

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions General safety information Contents General safety informationSetting up the appliance Reversing the door Changing the door hingesTo detach the soft stop mechanism Re-attaching the soft stop mechanismKitchen Cabinet Construction Kitchen Cabinet AirflowElectrical outlet Power cord Level Fish line for power cord Designing the Kitchen CabinetDesigning the Kitchen Cabinet Doors Height of the refrigerator door panel is Installation Water supplyAssembling the appliance To slide the appliance in and align it For appliances with a fixed water supply for the IceMakerAll appliances With 5/8 16 mm thick unitFor a 24 609.6 mm wide recess Fitting the unit doorsFor a 23-5/8 600 mm wide recess For chipboard doorsFor large unit doors Fasten the appliance door to the unit door with screwsConnecting the appliance Connecting the appliance

20707, 7084000-01, HC 1001/1050, HC 1011/1060 specifications

The Liebherr HC 1011 and HC 1060, along with the HC 1001 and HC 1050, represent a significant advancement in hydraulic crane technology. These models are designed for optimal performance, versatility, and efficiency in various lifting applications, making them indispensable in construction and industrial settings.

One of the key features of the Liebherr HC series is their exceptional lifting capabilities. The HC 1011 and HC 1060 are designed with robust hydraulic systems that provide impressive load capacities. These cranes can lift heavy materials with precision, allowing for efficient operation on job sites that require the moving of substantial loads. The HC 1001 and HC 1050 offer similar advantages, ensuring that projects can be completed smoothly and without unnecessary delays.

Technological innovation is a hallmark of Liebherr products, and these cranes are no exception. They feature advanced control systems that facilitate easy operation, enabling both experienced operators and those new to crane operation to work effectively. These systems also include safety features that prevent overloads and ensure stable lifting, reducing the risk of accidents on the job site.

The ergonomic design of the operator’s cabin in the HC series enhances comfort and visibility, enabling operators to maintain focus during operation. The cabin is equipped with user-friendly controls and displays, ensuring that vital crane functions are easily accessible. This design consideration is critical for maximizing productivity while minimizing operator fatigue.

Another significant characteristic of the Liebherr HC series is their durability and maintenance efficiency. Constructed with high-quality materials, these cranes are built to withstand the rigors of demanding work environments. Moreover, Liebherr has designed the cranes with accessibility in mind, making routine maintenance straightforward and quick, which minimizes downtime.

With features such as a modular design, these cranes can be customized to meet specific operational needs. Liebherr provides a range of attachments and accessories that enhance the versatility of the HC 1011, HC 1060, HC 1001, and HC 1050, allowing them to perform a variety of tasks beyond standard lifting operations.

In summary, the Liebherr HC 1011/1060 and HC 1001/1050 cranes combine power, technology, and durability to deliver a top-tier lifting solution. Their sophisticated features, safety mechanisms, and ergonomic design make them ideal for modern construction and industrial projects, ensuring that users can rely on them for both efficiency and safety in their lifting tasks.
Top Page Image Contents