Liebherr C 16, CI 16, 7080 359-02 Planning Information, Cabinet Opening Dimensions

PLANNING INFORMATION

Cabinet Opening Dimensions			Allow units to open a minimum of 90° to prevent
			problems removing drawers. With the door opening
			90°, you may have to move drawers slightly to clear
			the door interior.
			Refer to the minimum door clearances in the Pre-
ELECTRICAL OUTLET			Installation Specifications chart.
LOCATION			• Allow for a minimum 2" (5.08 cm) filler, for corner
cm)			installations, so the door can open to 90°. If
			you’re using raised panels, consider using a
(17.8
			wider filler.
7"
6" (15.2 cm)			• Use a filler strip when units are installed side by
			side. The width of this filler strip will vary
			depending on the configuration and panels used.
			• Be sure to add the filler strip width to the finished
			rough-in dimension. In any side by side
	-751/2" (192 cm)	3/4"- (212.7 cm)	installation, add an additional 1/2" (1.27 cm) to
			the combined numbers.
			IMPORTANT
		83	Refer to the scaled illustrations at the end of
			this section for specifics on door openings
			and filler size alternatives.
LOCATE WATER SUPPLY
WITHIN BOTTOM	cm)
SHADED AREA
	3" (7.6
18" (45.7 cm)
29-1/2" (75 cm)
Figure 2

A delight in freshness

4 C 16/CI 16