INTEGRATING CABINETRY - CI 16 ONLY
Overlay Panels
The overlay design line allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. To achieve this look, the most common way is to work with three panels, the decorative overlay panel, a 0.10" (0.25 cm) spacer panel and a 1/4" (0.635 cm) backer panel.
Overlay Panel 28.7" (72.9 cm)
Spacer Panel 27.4" (69.6 cm)
Backer Panel 28.2" (71.7 cm)
Refrigerator | 47.6"(120.9cm) | 45.3"(115cm) | 46.3"(117.6cm) |
Panel | |||
| |||
| Overlay Panel | Spacer Panel | Backer Panel |
|
| 29.2"(74.3 cm) | 27.9"(70.9 cm) | 28.9"(73.5 cm) |
Freezer |
| |||
|
|
|
| |
Panel |
| Overlay Panel | Spacer Panel | Backer Panel |
|
|
Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or, more likely, three different panels.
IMPORTANT
If you are replacing the factory air vents with an overlay, DO NOT restrict the air flow. The air flow must be the same or greater than the factory air vents of 31 square inches (200 cm2).
The door handles must be installed before the screw covers are installed. If you fail to install the handles before the screw covers, you can damage the covers. The screw covers are taped to the unit doors during shipping. Use care when removing covers.
The door panel weight must not exceed 25 lb (11.3 kg).
Spacer Panel
Overlay Panel
| 1/4" (0.635 cm) | |
cm) | Backer Panel | |
(0.25 | 0.6" (1.5 cm) | |
0.1" | ||
| ||
| 0.0625" (0.16 cm) |
7080 010
Figure 5
A delight in freshness
C 16/CI 16 | 7 |