Overview of all the components required

Overview of all the components required					Fixing and assembly
for installation, and their position on the
appliance
					GB
20
9	6	30	31	32
5	23
29	23	33	38
		33	38
				11
	34			39
				39
22	35
22				40	41
				40	41

					34			35	34
					34
					35					All the fastening elements are supplied with the appliance.
				24	29			40	41	W Fit the shim cl at the
			7	9						centreoftheappliance:
			6	9				35	34	Push into the rack
		8	6	9		30	31	32		and hook into the key
				23	29	33	38	11		holes.
				23	29						20


								11		W Screw the angle bracket dp
										using the hexagonal screw
					34			39		dq into the predrilled holes
								39		on the appliance door.	34
										on the appliance door.	34
					35					W Push the appliance three
										W Push the appliance three
				24	29					quarters of the way into the
29	27		7	9				40	41	niche.	35
29	27		7	9							35
				25				35	34	W Payattentiontothethickness
										of the unit wall:
25	28							11		If the unit walls are 16 mm thick= the niche
										should be 568 mm wide:
										- Glue the cover strip cnon the grip side and flush
										with the side wall of the appliance: Remove the	22
										protective film and the rubber gasket; if neces-
										sary cut the rubber gasket to suit the
										height of the niche.
										- Clip spacers co to each of the upper	23
										and cp lower hinges.
										- Push the appliance into the niche
										until the spacers touch the back of
										the unit.

Fixing and assembly