10/100 Auto Negotiation Switch User’s Guide
2
Installing the DES-3216
This chapter covers the following:
∙Unpacking the
∙Installation options and instructions
∙Powering on the
Open the box and carefully unpack the
∙
∙
∙Two mounting brackets and eight screws
∙Four rubber pads with adhesive backing
∙One six foot (1.82 m) power cord
∙
If any items are missing, contact the retailer where you purchased the
Be sure to register the
Installation Options
There are two options for installing the
Follow these guidelines for desktop/ shelf installation or rack installation:
∙The surface must support 18 lbs or 8 kg.
∙The power source must be within six feet (1.82 m)
∙Power cord and cables should never be stretched
∙Leave at least two inches around the
The following tools and materials may be necessary to install the
∙Screwdriver to install the brackets as needed
∙Wire cutters to cut cable as needed for network connections
∙Crimpers to crimp cable as needed
∙
Desktop/ Shelf Installation
Follow these steps to install the
1. Place the four rubber pads at the four corners of the
Installing the | 5 |
