10/100 Auto Negotiation/('￿3DQHOSwitch￿56￿￿￿￿User’sSRUWGuide

Front Panel

The DES-3216 is designed for management at a glance. The front panel of the DES-3216, displayed in Figure 1 has LEDs that give you essential information about the DES-3216 at a glance.

All 16 MDI-X ports on the DES-3216 can be used for network connections.

Figure 1: DES)DQ)DQ-3216 Front Panel3RZHUFRQQHFWRU3RZHUVZLWFK

All LEDs are located on the front panel of the DES-3216. Their purpose is to allow you to monitor the operation and performance of the DES-3216 at a glance.

Rear Panel

The three pronged power plug, two fans and the on/off switch are located at the rear of the DES-3216 displayed in Figure 2. When installing the DES-3216, leave enough room to allow you to unplug the power cable if necessary and to attach the RS-232 cable for Local Console Management.

There are heat vents located on the sides. The fans and the vents help to cool the DES-3216. Always leave two inches of space around the DES-3216 so that air can circulate and cool the DES-3216.

Figure 2: Rear Panel

Introduction

3

Page 11
Image 11
D-Link DES-3216 manual Front Panel, Rear Panel