10/100 Auto Negotiation Switch User’s Guide

1

Introduction

This chapter gives a physical and functional overview of the DES-3216. The DES-3216 is an intelligent, managed switch, designed for use on medium sized networks as part of the backbone or for use with other switches and hubs on a larger network.

The chapter is divided into the following sections. Each section briefly describes the features of the DES-3216. Most of the topics discussed will be explained in greater detail later in the manual.

The topics covered are:

Summary of Features

Panels of the DES-3216

Management Methods

Updating Firmware

Features

The DES-3216 has the following features:

All 16 ports auto-negotiate 10/100 Mbps.

The DES-3216 can be configured and customized to your network.

The DES-3216 can be managed in three ways: Local Console Management, Telnet and SNMP.

Supports Cut-through and Store-and-Forward switching.

Supports Full and Half Duplex for both 10 Mbps and 100 Mbps. .

Wire-speed packet filtering and forwarding for up to 16 ports.

Eight thousand active MAC address table entries per device with self-learning and table aging.

The DES-3216 supports SNMP for RFC 1213, RFC 1757, and RFC 1493.

VLAN support for eight broadcast domains.

Port Trunking support for bandwidth aggregation between two DES-3216 switches.

Introduction

2

Page 10
Image 10
D-Link DES-3216 manual Introduction, Features