Liebherr 110309 7084282 - 01 Controls and displays, Putting into operation

Page 4

Controls and displays

-Do not reach into the soft stop mechanism. Fingers may be trapped when the door is closed.

Please observe the specific information in the other sec- tions:

 

 

DANGER

 

identifies a situation involving direct

 

 

 

 

danger which, if not obviated, may re-

 

 

 

 

sult in death or severe bodily injury.

 

 

 

 

 

 

 

 

WARNING

 

identifies a dangerous situation

 

 

 

 

which, if not obviated, may result in

 

 

 

 

death or severe bodily injury.

 

 

 

 

 

 

 

 

CAUTION

 

identifies a dangerous situation

 

 

 

 

which, if not obviated, may result in

 

 

 

 

minor or medium bodily injury.

 

 

 

 

 

 

 

 

NOTICE

 

identifies a dangerous situation

 

 

 

 

which, if not obviated, may result in

 

 

 

 

damage to property.

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

identifies useful information and tips.

 

 

 

 

 

 

3 Controls and displays

3.1 Operating and control elements

Fig.

2

(7) Temperature display re-

(1)

Alarm button

 

 

frigerator compartment

(2)SuperFrost button (8) Child lock symbol

(3)On/Off button freezer (9) Down setting button refrig-

compartmenterator compartment

(4)Down setting button (10) Up setting button refrigera-

freezer compartmenttor compartment

(5)Up setting button freezer (11) On/Off button refrigerator

compartmentcompartment

(6)Temperature display (12) SuperCool button freezer compartment

3.2 Temperature display

The following are displayed in normal operation:

-the warmest freezing temperature

-the average cooling temperature

The freezer compartment temperature display flashes:

-the temperature setting is being changed

-after switch-on the temperature is not yet cold enough

-the temperature has risen several degrees

Dashes flash in the display:

The following displays indicate malfunction. Possible causes and corrective action (see Malfunction).

-nA

-F0 to F5

4 Putting into operation

4.1 Changing the door hinges

NOTICE*

Risk of damage to side-by-side appliances due to condensation! When a Side-by-Side appliance (S…) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered.

u Do not change over the door hinges.

Make sure the following tools are to hand: q spanner 13

q cordless screwdriver Torx 15, 20, 25, 30

Slide the appliance 2/3 of the way into the recess. Pull out the mains plug.

Open the doors.

4.1.1 To detach the soft stop mechanism

CAUTION

Risk of injury if soft stop contracts! u Detach with care.

Fig. 3

uPush tension spring Fig.3 (11) outwards, using a screwdriver.

uLower soft stop mechanism Fig. 3 (2) for removal.

uUnscrew holder Fig. 3 (1).

uUnfasten ball stud Fig. 3 (3) using a spanner.

4

Image 4
Contents Operating and installation instructions Appliance at a glance ContentsAppliance at a glance General safety information General safety informationDescription of appliance and equip- ment Net@Home Controls and displays Controls and displaysPutting into operation Installation Putting into operationWater connection To change the hingesSicbn Installing the appliance All appliancesFor 16 mm-thick unit walls = Slide in and align the applianceFitting the unit doors For 600 mm-wide recessFor particle board doors For frame and panel doorsTransporting the appliance Installing the applianceFor large unit doors Control ControlTemperature alarm Door alarmRefrigerator compartment BioFresh compartment Setting the humidity in the HydroSafe Freezer compartmentDrawers Thawing foodSetting the temperature in the freezer com- partment SuperFrostShelves VarioSpaceMaintenance MaintenanceManual defrosting Cold storage accumulatorsCleaning the appliance Cleaning the IceMakerCustomer service Defrosting with NoFrostMalfunction MalfunctionSwitching off the appliance Taking the appliance out of serviceDecommissioning Decommissioning