Mounting the hood body
•Screw the two screws 12d supplied onto the brackets 7.1.
•Hook the hood body onto the bracket 7.1, centring it around the vertical line.
•Use the adjusting screws 12d underneath the hood to level the hood body.
12.d
7.1
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 125 mm, the choice of which is left to the installer.
•To install a ø 125 mm air exhaust connection, insert the re- ducer flange 9 on the hood body air outlet and the adapting ring
•Fix the pipe in position using sufficient pipe clamps (not sup- plied).
•Remove any activated charcoal filters.
RECIRCULATION VERSION AIR OUTLET
•Push fit the air outlet fitting 15 onto the air outlet of the hood body.
•Ensure that the activated charcoal filters have been inserted.
ø 150 
ø 125
9 | 10 |
|
15
EN |
| 1 |
| 13 |