Indesit PZ 640T GH NG Installation, Compliance with standards, Dimensions of cutout

Page 4

Installation

WARNING: Before installation, check that the gas type (natu- ral gas or LPG/Propane) of the cooker is suitable for the gas type available to the installation. It is extremely dangerous to use the wrong gas type with any appliance, as fire or serious injury can result.

These instructions have been prepared for use by authorised persons. This unit must only be installed by an authorised person.

This appliance must not be installed in marine craft or recrea- tional vehicles.

Compliance with standards

This cooktop must be installed in accordance with the re- quirements of local gas and electrical authorities, as well as the latest published versions of the following standards:

‰AS/NZS 5601 Gas Installation code

‰SAA Wiring Rules

Dimensions of cutout

The following diagram indicates the dimensions of the re- quired cutout.

In placing the cooktop, suitable insulation between the cook- top undersurface and the top of the bench should be used.

Wherever possible, the cooktop should be secured to the benchtop using clamps.

 

 

 

555 mm

 

 

 

 

 

 

55

mm

 

 

mm

475

 

 

 

 

 

 

 

 

 

INSTALLER: Please also ensure that the duplicate data label supplied, be affixed in a suitable easily accessible location such as an adjacent cupboard or drawer, for future reference.

Dimensions (mm)

PZ640

PZ750

length (side to side)

600

750

width (front to back)

510

510

depth

44

44

Fitting the cooktop into cabinetry

The following minimum clearances to combustible materials must be observed:

‰Minimum clearance from edge of burner to side wall must be 200 mm.

‰Minimum clearance from edge of burner to rear wall must be 200 mm.

‰Minimum clearance from top of highest burner to cupboard above hob burners must be 600 mm.

Fixing to the housing unit

Proceed with fixing to the housing unit as follows (see figure above).

‰Mount the hooks, partly tightening the screws into the holes.

‰Position the sealing gasket approximately 5-6 mm from the edge of the installation hole, matching up the two ends of the seal without overlapping.

‰Insert the hob into the cutout, making sure it is positioned centrally and that the edge adheres to the sealant

‰Position the hooks correctly, as shown in the figure, and then tighten the screws to hold them in place.

Range hoods

Range hoods and overhead exhaust fans must be installed according to manufacturers’ instructions but in no case shall clearance from hob burners be less than 600 mm for range hoods and 750 mm for overhead exhaust fans.

Adjacent cabinetry

It is recommended that the adjacent kitchen surfaces should be capable of withstanding temperatures of 100°C.

4

Image 4
Contents Contents Safety Warnings Using Your Cooker Installation Dimensions of cutoutCompliance with standards Fitting the cooktop into cabinetryFitting the cooktop above an oven Gas connection Electrical connectionGas type conversion Flexible hosePost installation checks Service DetailsElectrical equipment and components Troubleshooting Technical SpecificationsGas consumption ConnectionsCare And Maintenance

PZ 750R GH NG, PZ 640T GH NG specifications

Indesit, a renowned brand in home appliances, presents two remarkable gas cookers: the Indesit PZ 640T GH NG and the PZ 750R GH NG. These models stand out for their efficiency, advanced features, and user-friendly design, making them ideal for both amateur cooks and seasoned chefs alike.

The Indesit PZ 640T GH NG is a compact and versatile model featuring four gas burners, offering ample cooking space for various dishes. This stove provides a perfect combination of power and precision with its high-efficiency burners designed to reduce cooking time while ensuring even heat distribution. The easy-to-use knobs allow the user to adjust the flame to their desired level quickly. Equipped with a durable enamel finish, this cooker is not only stylish but also easy to maintain, keeping your kitchen looking pristine.

On the other hand, the Indesit PZ 750R GH NG takes things a step further with a larger cooking surface, featuring five gas burners. This extra burner provides additional flexibility, making it perfect for preparing complex meals that require multiple pots. The intelligent burner layout ensures that pots of various sizes can be fitted comfortably. The PZ 750R GH NG is designed for energy efficiency, allowing you to save on gas while enjoying high cooking performance.

Both models feature an automatic ignition system, which provides a quick and safe way to start cooking. The integrated safety devices ensure that gas flow is interrupted if the flame goes out, offering peace of mind for users. Additionally, the oven compartments in these models boast even heating technologies that enhance the cooking experience and ensure that your dishes are cooked to perfection.

With a sleek design and various color options, the Indesit PZ 640T GH NG and PZ 750R GH NG can complement any kitchen décor. The availability of easy-to-clean surfaces and removable burners make maintenance hassle-free, allowing users to spend more time enjoying their culinary creations rather than worrying about cleanup.

In conclusion, whether you choose the compact PZ 640T GH NG or the more spacious PZ 750R GH NG, both cookers embody Indesit's commitment to quality and performance. With their innovative features and user-centric designs, they promise to elevate your cooking experience and meet the demands of everyday meal preparation with ease and reliability.