John Lewis JLCH300, JLCH200, JLCH400 Replacing the lamp, Problem Possible cause Solution

Page 14

Problem

Possible cause		Solution

There is no voltage in the mains		Call an electrician.
socket (try to connect another
appliance into it).

If after following these instructions you do not resolve the fault with your appliance please refer to the "Repairs - After Sales Service".

Replacing the lamp

1.Disconnect the mains plug from the mains socket.

2.Replace the used lamp with a new lamp of the same power (the maximum power is shown on the lamp cover).

3.Connect the mains plug to the mains socket.

4.Open the lid. Make sure that the lamp comes on.

Warning! Do not remove the lamp cover at the time of replacement. Do not operate the freezer if the lamp cover is damaged or missing.

14

Image 14

Contents JLCH200 JLCH300 General safety Safety informationChildren and vulnerable people safety Daily Use Do not damage the refrigerant circuitService Care and cleaningInstallation Environment ProtectionContents Product description Operation Control panelFirst use Daily useStorage baskets Helpful hints and tipsOpening and closing the lid Low frost SystemHints for storage of frozen food Care and cleaningPeriodic cleaning Defrosting the freezer Periods of non-operationSolution What to do if…There is excessive frost Problem Possible cause Solution Replacing the lampPositioning Technical dataInstallation Electrical ConnectionRepairs after sales service Ventilation requirementsEnvironmental concerns Spare partsPage Page 820419453-01-112009 920672589 920711270 920478933