Removable telescopic Shelf Supports and Catalytic Panels
Be careful when removing the telescopic shelf supports. The catalytic panels are not fixed to the oven walls and may fall out when the shelf supports are removed.
The shelf supports with telescopic runners and the catalytic panels can be removed for easy cleaning.
Make sure the appliance has cooled down completely before cleaning.
) Proceed as follows :
1. Use one hand to pull on the front part of the shelf support to remove it while keeping the shelf support and catalytic panel in place with the other hand (1).
2. Hold the shelf support and catalytic panel in place and at the same time unhook the shelf support at the back (2).
3. Clean the shelf supports with warm, soapy water and wipe it with a soft cloth. Never use abrasive products which could damage them.
Important: The telescopic runners must not be cleaned in the dishwasher.
Attention: the rollers must not be greased.
4. Once you have finished cleaning assemble the shelf support and catalytic panel and replace it again (reverse the steps above) - (3).
Check that the hooks are engaged properly when you replace the shelf support and catalytic panel.
It is possible to remove the telescopic runners only,unlockingtheelementsasshownonpage 16.
1 |
2 |
3 |
22