Replacing the Oven Light
Disconnect the appliance
If the oven bulb needs replacing, it must comply with the following specifications:
-Electric power: 15 W/25 W,
-Electric rate: 230 V (50 Hz),
-Resistant to temperatures of 300°C,
-Connection type: E14.
These bulbs are available from your local Service Force Centre.
)
1. Ensure the oven is isolated from the electrical supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover and restore the electrical supply.
Grill heating Element
This model has been fitted with a hinged grill ele- ment to make the roof of the oven especially easy to clean.
Before proceeding ensure the oven is cool and disconnected from the electricity supply.
)1. Undo the screw fastening the grill element. When carrying out this operation for the first time, we recommend using a screwdriver.
2. Then gently pull the grill downwards to allow access to the oven roof.
3. Clean the oven roof with a suitable cleaner and wipe dry before returning the hinged grill element to its original position.
4. Gently push up the grill element into place and firmly screw into place the holding nut.
Ensure the holding nut on the grill element is properly tightened so that it does not fall down when in use.
25