After cleaning, place the inner glass back in its original position by inserting it in the rubber distance holders C.
The inner pane B (with side decors) must be arranged with the decorated surface to the inner side of the door. The slight roughness of the printing must not be discernible when you stroke your fingers
over the visible surface.
After placing the inner glass back:
Figure 3. Insert the perforated plate A back in its original position and check that everything is securely fastened and firm.
DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter.
If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Force Centre who will be pleased to advise further.
It is not possible to reverse the oven door.
A
C
C
Fig. 3
24