How to use the pyrolytic cleaning function
Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure that the oven is empty. Do not leave anything inside it (e.g. pans, grids, baking tray, dripping pan, etc.) as this could heavily damage them.
Ensure that the oven door is closed before activating the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it is advisable not to use the hob as this could cause overheating and damage the appliance.
During the pyrolytic cleaning cycle the oven door becomes hot. Children should be kept away until it has cooled.
If the oven has been installed under a built- inhob,donotswitchthehobcookingzones on while pyroliytic cleaning is running.
Choose this function to clean the oven by pyrolysis. The following pyro levels are available:
Pyrolytic 1 (P I) time : 2 h = 30 min
Pyrolytic 2 (P 2) time : 2 h 30 min. = 30 min heat- up +1 h 30 min at 480°C + 30 min cooling down.
The pyro duration time cannot be changed.
To activate the pyrolytic cleaning function proceed as follows:
1.Press button 
to switch on the oven. Press the Oven function button as often as necessary, until the “Pyro“ function symbol 
(level 1 - P I) will appear in the display.
Simultaneously, the symbol 
and the “P I” writing will flash in the display and an acoustic signal will be emitted.
27