John Lewis JLBIOS664 When the oven is first installed, To set the correct time of day

Page 8

When the oven is first installed

Remove all packaging, both inside and outside the oven, before using the oven.

When the oven is first connected to the electrical supply, the display will automatically show 12:00

and the symbol will flash.

Ensure the correct time of day is set before using the oven.

To set the correct time of day:

a) while the symbol is flashing, set the correct time of day by pressing buttons “ “ or “ “. The time arrow symbol will disappear about 5 seconds after the correct time is displayed. b) if the symbol is not flashing anymore, press Time Functions button twice.

Then, proceed as described in point a).

Before first use

The oven should be heated without food.

To do that, proceed as follows:

press button to switch on the oven.

press Oven function button twice and select

the "Conventional Cooking" function .

set the temperature to 250 °C using the increasing push button “ “.

Allow the oven to run empty for

approximately 45 minutes.

— open a window for ventilation.

This procedure should be repeated with the

"Fan Cooking" and "Full Grill" function for approximately 5-10 minutes.

8

Image 8
Contents JLBIOS664 Oven Contents Guide to using the user instructionsDuring use Important Safety InformationInstallation People Safety Maintenance and CleaningService Environmental InformationDescription of the appliance Control panel Cooling fan Oven safety devicesSafety thermostat Before first use When the oven is first installedTo set the correct time of day To open the oven door, always hold the handle in the centre How to select a Cooking FunctionOn/Off Push Button How to set the Temperature If symbol is not flashing, press Oven function button once200C Function SymbolsConventional cooking The heat How to set the minute minder To programme the Oven to switch offTo use or to change the Minute Minder setting To cancel the Minute MinderTo cancel the programme, simply cancel the Duration Time To Programme the Oven to Switch On and OffTo cancel the Cooking Duration Time Special and Energy Saving Functions Automatic Cut-Off FunctionResidual Heat Function Child Lock FunctionFast Heat Up function To unlock the ovenTo disable the Beep Function Beep modeTo enable this function, the oven must be off Using the oven Do not place cookware directly on the oven baseTop heating element Fan cookingConventional Cooking How to use the Full Grill How to use the Inner GrillHow to Use the Thermal Grilling Bottom heating elementPizza oven DefrostingHints and Tips On bakingCooking times Baking table Conventional and Fan CookingRoasting Table MeatPizza Function Conventional GrillingThermal Grilling Cleaning and Maintenance Cleaning materialsExternal cleaning Oven CavityPyrolytic cleaning How to use the pyrolytic cleaning function Page Page Oven door Page Themiddlepanemustbeputbackintotheright seat as shown in b Page Oven Shelves and Shelf Supports Replacing the oven lightRemoving the shelf support rails Fitting the shelf support railsProblem Solution Something not workingTechnical data Dimensions of the recessDimensions of the oven cavity Heating element ratingsElectrical Connection For Europe use onlyInstructions for Building BuildingSecuring the Appliance to the Cabinet Fig. DJohn Lewis Partnership 397164701