To programme the pyrolytic cleaning cycle (delayed start, automatic stop)
If you desire, you can programme the starting and ending time of the pyrolytic cleaning cycle.
1.Press button 
to switch on the oven. Press the Oven function button as often as necessary, until the “Pyro“ function symbol
(level 1 - P 2) appears in the display. Simultaneously the “P I” writing and the
symbol 
will flash in the display and an acoustic signal will be emitted. This means that, before activating the pyrolytic cleaning function, you have to remove all the oven accessories.
2.The Cooking Duration symbol 
will flash
for some seconds; during this time push ' ' or ' 
' buttons to select the pyrolytic 1 (P 1) or pyrolytic 2 (P 2) function.
3.Once you have chosen the desired pyrolytic function, the “P1” or "P2" writing will flash in the display, alternating with the symbol
, waiting for confirmation to start the pyrolytic cleaning function.
At this time, push the time function button Time Functions The "End of Cooking"
symbol 
and the arrow symbol 
will flash. The control panel will display the end of the cleaning cycle (that is, the actual time + cooking duration time).
Push ' ' or '
' buttons to select the required end of cycle time. After a few seconds, the
“Pyro” writing and the symbol | will |
stop flashing, the acoustic signal will stop while
the Cooking Duration symbol 
will flash until the pyrolytic cleaning cycle start.
4.At the programmed time, the pyrolytic cleaning cycle will automatically start.
5.When temperature inside the oven reaches 300°C, the door lock will be activated and the
related symbol 
will be displayed.
At the end of the pyrolytic cleaning process, the display shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time,
press button 
.
1 
29