Fill with detergent
30 | MAX | |||
20 | 4 | 3 | 2 | 1 |
|
| - | ||
+ |
|
| ||
1.Press the release button (2) to open the lid (3) of the detergent dispenser.
2.Put the detergent in compartment (1).
3.If the washing programme has a prewash phase, put a small quantity of detergent on the inner side of the appliance door.
4.If you use detergent tablets, put the tablet in compartment (1).
5.Close the lid. Make sure that it locks into position.
Detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residual.
Multi tab function
This appliance is equipped with the Multi tab function, that allows the use of combi detergent tablets.
These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (e.g. 3 in 1, 4 in 1, 5 in 1).
Check whether these detergents are suitable for your water hardness. Refer to the manufacturer's instructions.
The Multi tab function deactivates the inflow of rinse aid and salt from each respective supply container. Also the indicators for salt and rinse aid are deactivated.
The Multi tab function can increase the programme time that will automatically be updated on the display.
Activate the Multi tab function before the start of a washing programme.
Activate or deactivate the Multi tab function before the start of a washing programme. You cannot activate or deactivate the function when a washing programme is in progress.
To activate the Multi tab function
•Press the Multi tab button, the Multi tab indicator comes on. The function has been activated.
–When the Multi tab function is activated, it remains on until you deactivate it.
18