John Lewis JLDW 1221 Delay start buttons, Display, Function buttons, Indicators, Setting mode

Page 8

Dishes can still be wet at the end of the programme when you open the appliance door. We recommend that you keep the door ajar and let the dishes dry.

Press this button to switch on the option. The related indicator comes on.

This function is available with all the washing programmes but has no impact on some programmes. Refer to ''Washing programmes''.

Delay start buttons

Press one of these buttons to delay the start of the washing programme from 1 to 24 hours. Refer to 'Select and start a washing programme'.

The display

The display shows:

•The water hardness adjustment of the water softener.

•The remaining time of the programme in progress.

•The activation or deactivation of the rinse aid dispenser (only with the Multi tab function activated).

•The end of a washing programme (the display shows a zero).

•The countdown of the delay start.

•The alarm codes related to a malfunction of the appliance.

Function buttons

The following operations can be done with these buttons:

•The electronic setting of the water softener.

•The cancellation of a washing programme in progress.

•The activation or deactivation of the rinse aid dispenser (only with the Multi tab function activated).

Indicators

In addition to the programme indicators other indicators help you in the use of your appliance.

Multi tab

The indicator comes on when you

 

activate the Multi tab function.

 

 

Energy

The indicator comes on when you

save

activate the Energy save function.

 

 

Rinse aid

The indicator comes on when the

1)

rinse aid has run out.

 

 

Salt 1)

The indicator comes on when the

 

salt has run out.

 

The salt indicator can remain on

 

for a few hours after that salt has

 

been replenished (assuming the

 

appliance remains switched on).

 

The operation of the appliance is

 

not affected.

 

 

1)The salt and rinse aid indicators are never on while a washing programme is running even if filling with salt and/or rinse aid is necessary.

Setting mode

The appliance must be in setting mode for these operations:

•To start a washing programme.

•To start a delay start.

•To adjust electronically the level of the water softener.

•To activate or deactivate the rinse aid dispenser (only with the Multi tab function active).

Switch on the appliance. The appliance is in setting mode when:

• All the programme indicators come on.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Jldw Dishwasher Important safety information InstallationChild safety General safetyMaintenance and cleaning Service Correct useEcological hints Environmental informationContents Rinse aid dispenser Worktop Description of the applianceDetergent dispenser Control panel On/off buttonProgramme buttons Multi tab buttonDelay start buttons IndicatorsSetting mode DisplayOnly one programme indicator comes on Washing programmesConsumption values When the appliance is first installedWater softener Release function button B and function button C Setting manuallySetting electronically Switch off the appliance to confirm the operation Filling with saltFilling with rinse aid Display shows the current level e.g. displayed = levelAdjusting the rinse aid dosage Daily useLoading cutlery and dishes Start the washing programmeLower basket Cutlery basket Upper basket Adjusting the height of the upper basket Moving back the upper basket to the lower position Use of detergentMoving the upper basket to the higher position Multi tab function Fill with detergentStarting the washing programme without delay start Starting the washing programme with delay startSelect and start a washing programme Hours are no longer flashing but fixed with static lightCancelling the delay start Cancelling the washing programmeInterrupting a washing programme in progress Countdown has not yet startedUnloading the appliance Maintenance and cleaning Cleaning the filtersFrost precautions Cleaning the applianceSomething not working Prolonged periods of non-operationShows an alarm code With some malfunctions, the displaySuggested corrective actions Appliance does not fill withWashing and drying results are not satisfactory Activating the rinse aid dispenser Technical data InstallationUnpacking Fitting under the kitchen worktopLevelling of the appliance Removing the appliance worktopWater drain connection Water connectionWater inlet connection Page Electrical connection Repairs after sales service Made even if the appliance is under guaranteeSpare parts ModPage Page Page 117938390-D-032011 Subject to change without notice
Top Page Image Contents