John Lewis JLDW 1221 instruction manual

Page 30

Our appliances are supplied with a security device to protect against the return of dirty water back into the appliance. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your appliance. We therefore advise you to remove it.

When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the appliance drain hose spigot.

30

Image 30
Contents Jldw Dishwasher Important safety information InstallationMaintenance and cleaning Service Child safetyGeneral safety Correct useEcological hints Environmental informationContents Description of the appliance Detergent dispenserRinse aid dispenser Worktop Programme buttons Control panelOn/off button Multi tab buttonSetting mode Delay start buttonsIndicators DisplayOnly one programme indicator comes on Washing programmesWhen the appliance is first installed Water softenerConsumption values Setting manually Setting electronicallyRelease function button B and function button C Filling with rinse aid Switch off the appliance to confirm the operationFilling with salt Display shows the current level e.g. displayed = levelLoading cutlery and dishes Adjusting the rinse aid dosageDaily use Start the washing programmeLower basket Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent Moving the upper basket to the higher positionMoving back the upper basket to the lower position Multi tab function Fill with detergentSelect and start a washing programme Starting the washing programme without delay startStarting the washing programme with delay start Hours are no longer flashing but fixed with static lightInterrupting a washing programme in progress Cancelling the delay startCancelling the washing programme Countdown has not yet startedUnloading the appliance Maintenance and cleaning Cleaning the filtersSomething not working Frost precautionsCleaning the appliance Prolonged periods of non-operationSuggested corrective actions Shows an alarm codeWith some malfunctions, the display Appliance does not fill withWashing and drying results are not satisfactory Activating the rinse aid dispenser Unpacking Technical dataInstallation Fitting under the kitchen worktopLevelling of the appliance Removing the appliance worktopWater connection Water inlet connectionWater drain connection Page Electrical connection Spare parts Repairs after sales serviceMade even if the appliance is under guarantee ModPage Page Page 117938390-D-032011 Subject to change without notice