John Lewis JLDW 1221 instruction manual Select and start a washing programme

Page 19

To deactivate the Multi tab function and use separately detergent, salt and rinse aid

1.Press the Multi tab button, the Multi tab indicator goes off. The function has been deactivated.

2.Fill the salt container and the rinse aid dispenser.

3.Adjust the water hardness to the highest level.

4.Perform a washing programme without loading any dishes.

5.When the washing programme is completed, adjust the water softener to the water hardness in your area.

6.Adjust the rinse aid dosage.

Select and start a washing programme

Starting the washing programme without delay start

1.Open the appliance door.

2.Switch on the appliance. Make sure that the appliance is in setting mode.

3.Select a washing programme. Refer to 'Washing programmes'.

•The related programme indicator comes on while the other programme indicators go off.

•The programme time flashes in the display.

4.Close the appliance door. The washing programme starts automatically.

•In the display the programme time is no longer flashing but fixed with static light,

You can select the washing programme also with the door closed. Once you set a washing programme, you have only three seconds to select a different programme. After these three seconds, the washing programme starts automatically.

Starting the washing programme with delay start

1.Open the appliance door.

2.Switch on the appliance and select a washing programme.

3.Press one of the delay start buttons until the display shows the hours for the delay start.

•The hours flash in the display.

4.Close the appliance door. The countdown starts automatically.

•The hours are no longer flashing but fixed with static light .

19

Image 19

Contents Jldw Dishwasher Installation Important safety informationCorrect use Child safetyGeneral safety Maintenance and cleaning ServiceEnvironmental information Ecological hintsContents Detergent dispenser Description of the applianceRinse aid dispenser Worktop Multi tab button Control panelOn/off button Programme buttonsDisplay Delay start buttonsIndicators Setting modeWashing programmes Only one programme indicator comes onWater softener When the appliance is first installedConsumption values Setting electronically Setting manuallyRelease function button B and function button C Display shows the current level e.g. displayed = level Switch off the appliance to confirm the operationFilling with salt Filling with rinse aidStart the washing programme Adjusting the rinse aid dosageDaily use Loading cutlery and dishesLower basket Cutlery basket Upper basket Adjusting the height of the upper basket Moving the upper basket to the higher position Use of detergentMoving back the upper basket to the lower position Fill with detergent Multi tab functionHours are no longer flashing but fixed with static light Starting the washing programme without delay startStarting the washing programme with delay start Select and start a washing programmeCountdown has not yet started Cancelling the delay startCancelling the washing programme Interrupting a washing programme in progressUnloading the appliance Cleaning the filters Maintenance and cleaningProlonged periods of non-operation Frost precautionsCleaning the appliance Something not workingAppliance does not fill with Shows an alarm codeWith some malfunctions, the display Suggested corrective actionsWashing and drying results are not satisfactory Activating the rinse aid dispenser Fitting under the kitchen worktop Technical dataInstallation UnpackingRemoving the appliance worktop Levelling of the applianceWater inlet connection Water connectionWater drain connection Page Electrical connection Mod Repairs after sales serviceMade even if the appliance is under guarantee Spare partsPage Page Page 117938390-D-032011 Subject to change without notice