John Lewis JLDW 1221 instruction manual Activating the rinse aid dispenser

Page 26

The washing and drying results are not satisfactory

	The detergent can be the	Use a different brand of
	cause.	detergent.

The dishes are wet.	The washing programme was	For better drying results, keep
	without a drying phase or with	the door ajar for some minutes.
	a decreased drying phase.

The dishes are wet and matt.	The rinse aid dispenser is	Fill the rinse aid dispenser with
	empty.	rinse aid.

	The Multi tab function is on	Activate the rinse aid dispenser.
	(this function automatically
	deactivates the rinse aid
	dispenser).

Activating the rinse aid dispenser

1.Switch on the appliance. The appliance must be in setting mode.

2.Press and hold function button (B) and function button (C) simultaneously until the indicators above function buttons (A), (B) and (C) start to flash.

3.Release function button (B) and function button (C).

4.Press function button (B), the indicators above function buttons (A) and (C) go off while the indicator above function button (B) continues to flash. The display shows the current setting.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

5.Press function button (B) again. The display shows the new setting.

6.Switch off the appliance to confirm the operation.

26

Image 26

Contents Jldw Dishwasher Important safety information InstallationMaintenance and cleaning Service Child safetyGeneral safety Correct useEcological hints Environmental informationContents Rinse aid dispenser Worktop Description of the applianceDetergent dispenser Programme buttons Control panelOn/off button Multi tab buttonSetting mode Delay start buttonsIndicators DisplayOnly one programme indicator comes on Washing programmesConsumption values When the appliance is first installedWater softener Release function button B and function button C Setting manuallySetting electronically Filling with rinse aid Switch off the appliance to confirm the operationFilling with salt Display shows the current level e.g. displayed = levelLoading cutlery and dishes Adjusting the rinse aid dosageDaily use Start the washing programmeLower basket Cutlery basket Upper basket Adjusting the height of the upper basket Moving back the upper basket to the lower position Use of detergentMoving the upper basket to the higher position Multi tab function Fill with detergentSelect and start a washing programme Starting the washing programme without delay startStarting the washing programme with delay start Hours are no longer flashing but fixed with static lightInterrupting a washing programme in progress Cancelling the delay startCancelling the washing programme Countdown has not yet startedUnloading the appliance Maintenance and cleaning Cleaning the filtersSomething not working Frost precautionsCleaning the appliance Prolonged periods of non-operationSuggested corrective actions Shows an alarm codeWith some malfunctions, the display Appliance does not fill withWashing and drying results are not satisfactory Activating the rinse aid dispenser Unpacking Technical dataInstallation Fitting under the kitchen worktopLevelling of the appliance Removing the appliance worktopWater drain connection Water connectionWater inlet connection Page Electrical connection Spare parts Repairs after sales serviceMade even if the appliance is under guarantee ModPage Page Page 117938390-D-032011 Subject to change without notice