Insert exterior7cornice joint at every case joint. The exterior cornice joints are shipped loose with each case
COLOR |
BAND |
Close joints on8color band by sliding the panels together. The color band can be moved left or right as required to allow adjustment.
STREAMLYNE |
MASTER BUMPER |
EXTERNAL |
BUMPER JOINT |
If the case 9has a Streamlyne front style the bumper may be shipped loose in the case. Before installing bumper on the case install the exter- nal bumper joint on the Streamlyne bumper. Simply slide the joint over the bumper for either
STREAMLYNE |
MASTER |
BUMPER |
MASTER BUMPER |
BRACKET |
Place 10the hook of the Streamlyne bumper on the lip of the master bumper bracket and rotate the bumper down while pushing it in. Once the top edge of the bumper has slipped under the color band make sure it is pushed in as far as it will go.
SCREW |
BUMPER |
ALIGNMENT PIN |
LOCATION |
Once 11the Streamlyne bumper has been properly seated, attach the bumper to the tank with the screws provided. Insert the bumper align- ment pin into the underside of the bumper to help align it to the bumper on the next case.
UPPER |
KICKPLATE |
RETAINER |
KICKPLATE |
BRACKET |
Attach 12the upper kickplate retainer, which is shipped loose with the case. Line up the retainer with the kickplate bracket and secure with the screws provided. The kickplate brackets are shipped loose with the ORZ and ORZH models but come installed on the ONRZ and ONRZH models.
KICKPLATE |
BRACKET |
“J” RAIL |
Attach 13the “J” rail, which is shipped loose with the case. Line up the rail with the kickplate bracket and secure with the screws provided.
UPPER |
KICKPLATE |
RETAINER |
KICKPLATE |
“J” RAIL |
Insert top14of kickplate into the upper kickplate retainer. Slide the kickplate up into retainer then down on the “J” rail.
13
Insert 15nose bumper into master bumper channel. Roll nose bumper into channel along entire lineup (up to 96’). We recommend that the nose bumper be left in the store 24 hours before installing. DO NOT STRETCH the bumper during installation as it will shrink to its original length and leave a gap.