Hill Phoenix ONRBH, ORBH manual Model Orbh, Coil

41 7/16 in [105.2 cm]

			Amp plate &
			Serial Plate
			location
		68 in
		[172.7 cm]
		(Frame Height)
85 1/16 in	63 in
	[160.1 cm]
[216.0 cm]		66 3/8 in
		[168.6 cm]
87 1/16 in		(Door Height)
[221.1 cm]
			1/2 BUMPER OPTION
	30 7/8 in [78.4 cm]
	COIL	16 1/16 in	7 1/2 in
	PLENUM		[19.1 cm]
		[40.9 cm]
5 1/8 in	6 13/16 in [17.2 cm]*	8 1/2 in
		[21.6 cm]
[13.1 cm]	31 9/16 in [80.2 cm]
	39 1/4 in [99.7 cm]
	42 11/16 in [108.4 cm]
			PIPING-TO-TOP
			(OPTIONAL)

MODEL

ORBH

		WIRING-TO-TOP			REAR REFRIGERATION
					(13 15/16" off of floor)
8 in [20.3 cm]		(OPTIONAL)	12 3/4 in [32.4 cm]
					3 3/8 in [8.6 cm]
10 in
[25.4 cm]				4 in [10.2 cm]	28 5/8 in
			35 1/8 in
					[72.7 cm]
			[89.2 cm]
31 9/16 in
			**		33 9/16 in
[80.2 cm]
					[85.3 cm]
34 11/16 in
[88.1 cm]		ELECTRICAL			39 1/4 in
42 11/16 in					[99.7 cm]
[108.4 cm]
					REFRIGERATION
JUNCTION BOX					1 1/2 in
(STANDARD)					[3.8 cm]
		C			{END}
16 1/16 in [40.8 cm]
		L	1 1/2" PVC DRAIN		8 11/16 in [22.1 cm]
18 9/16 in [47.1 cm]			CONNECTION
		FRONT OF CASE
		60 in [152.4 cm] {2 Door}
		90 in [228.6 cm] {3 Door}
		120 in [304.8 cm] {4 Door}
		150 in [381.0 cm] {5 Door}
	NOTES:	180 in [457.2 cm] {6 Door}
		96 in [243.8 cm] {8' case}
		144 in [365.8 cm] {12' case}
	* STUB-UP AREA
	** RECOMMENDED STUB-UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS

zENDS ADD APPROXIMATELY 1 INCH TO CASE HEIGHT

zWIRING-TO-THE-TOP- ADDS APPROXIMATELY 1 INCH TO CASE HEIGHT

zA 2" MINIMUM AIR GAP IS REQUIRED BETWEEN THE REAR OF THE CASE AND A WALL

zSUCTION LINE (ALL LENGTHS) 1/2"

zLIQUID LINE (ALL LENGTHS) - 3/8", LIQUID LINE w/ HOT GAS DEFROST (ALL LENGTHS) - 1/2"

zAVAILABLE SHELF SIZES: WIRE SHELVES 16", 18", 20", 22" & 23 1/2"

SOLID SHELVES 18", 20", 22", 24" & 27"

(TOP SHELF MUST BE 24" OR SHORTER WHEN USING 27" SHELVES. RECOMMENDED CONFIGURATION IS 1 - 24" SHELF AND 4 - 27" SHELVES BELOW TOP SHELF)

5