Multiquip EM-70P, EM-70S EM-70 PLASTER/MORTAR Mixer Rules for Safe Operation, Read this manual

Page 10

EM-70 PLASTER/MORTAR MIXER — RULES FOR SAFE OPERATION

 

DANGER

Read this manual!

 

 

 

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the EM-70 plaster and mortar mixer:

GENERAL SAFETY

■DO NOT operate or service this equipment before reading this entire manual.

■This equipment should not be operated by persons under 18 years of age.

■NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

■NEVER operate this equipment when not feeling well due to fatigue, llness or taking medicine.

■NEVER operate this equipment under the influence of drugs or alcohol.

■ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the mixer.

■NEVER place hands inside the drum while the blades are rotating.

■Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

■Manufacture does not assume responsibility for any accident due to equipment modifications.

■NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

■NEVER touch the hot exhaust

manifold, muffler or cylinder. Allow these parts to cool before servicing engine or mixer.

■High Temperatures – Allow the engine to cool before adding fuel or

performing service and maintenance

functions. Contact with hot! components can cause serious burns.

■The engine section of this mixer requires an adequate free flow of cooling air. NEVER operate the mixer in any enclosed or narrow area where free flow of the air is restricted. If the air flow is

restricted it will cause serious damage to the mixer or engine and may cause injury to people. Remember the mixer's engine gives off DEADLY carbon monoxide gas.

■ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

■ALWAYS use extreme caution when working with flammable liquids.When refueling, stop the engine and allow it to cool. DO NOT smoke around

or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

■NEVER operate the mixer in an explosive atmosphere or near

combustible materials. An explosion or fire could result causing severe bodily harm or even death.

■Topping-off to filler port is dangerous, as it tends to spill fuel.

■Stop the engine when leaving the mixer unattended.

■Block the unit when leaving or when using on a slope.

■Maintain this equipment in a safe operating condition at all times.

WARNING Starting the Mixer Engine

NEVER! start the engine or engage the paddle arms when the drum is in the discharge (down) position.

PAGE 10 — EM-70 PLASTER/MORTAR MIXER — OPERATION MANUAL — REV. #1 (008/10/04)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model EM-70S Steel Model EM-70P Plastic Page Wilmington Ave Carson, CA Email mq@multiquip.comEM-70 PLASTER/MORTAR Mixer -TABLE of Contents Direct TOLL-FREE access EM-70 PLASTER/MORTAR Mixer Specifications Capacity Cu. ft 198 litersEM-70 PLASTER/MORTAR Mixer Dimensions Description Dimensions in. cmBurn Hazards EM-70 PLASTER/MORTAR Mixer Safety Message Alert SymbolsInstructions for data relative to its safe operation Respiratory HazardsAlways wear approved eye and hearing protection Equipment DamageRead this manual EM-70 PLASTER/MORTAR Mixer Rules for Safe OperationNever operate the mixer in an explosive atmosphere or near Never pour or spray water over the engine or electric motor Mixer when in useStand Clear Tow Bar toVehicle Connection Coupler Only Towing Safety Precautions Regularly InspectEM-70 PLASTER/MORTAR Mixer -TOWING Guidelines ReplacingAlways Tow with EM-70 PLASTER/MORTAR Mixer Safety Chain ConnectionWhen Towing Tow Bar to Mixer ConnectionEM-70 PLASTER/MORTAR Mixer Operation and Safety Decals Machine Safety DecalsEM-70 PLASTER/MORTAR Mixer General Information EM-70 PLASTER/MORTAR Mixer Major Components Mixer ComponentsExplosive EM-70 PLASTER/MORTAR Mixer Engine ComponentsInitial Servicing Burn HazardElectric Motor EM-70 PLASTER/MORTAR Mixer Electric MotorElectric Motor Connection EM-70 PLASTER/MORTAR Mixer Electric Motor Electric Motor Voltage SwitchImportant!, when changing the input Replace the voltage lock-out boltAdjust paddles as shown in a Paddle Blade Adjustment Steel DrumAdjust paddles as shown in b Paddle Blade Adjustment Poly DrumInspection EM-70 PLASTER/MORTAR Mixer InspectionBefore Starting Engine Oil CheckEM-70 PLASTER/MORTAR Mixer Inspection Start-up ProcedureGasonline Engine EM-70 PLASTER/MORTAR Mixer START-UP ProcedureGeneral Safety Respiratory HazardEngine ON/OFF Switch Dump Handle Safety EM-70 PLASTER/MORTAR Mixer START-UP/OPERATION ProceduresMixing Dumping Stop the engine EM-70 PLASTER/MORTAR Mixer SHUT-DOWN ProceduresOFF position Engine after every useEM-70 PLASTER/MORTAR Mixer Maintenance Engine Engine Maintenance ScheduleMaintenance EM-70 PLASTER/MORTAR Mixer Maintenance EngineExplosive Hazard Drum Head Seals EM-70 PLASTER/MORTAR Mixer Maintenance MixerBall Socket and Clamp Face Maintenance Drum Bearing Bracket LubricationCountershaft Bearing Lubrication EM-70 PLASTER/MORTAR Mixer Maintenance MixerMain Gear and Drive Pinion Alignment Gear Lubrication Grease Fittings Zerk Maintenance Electric MotorInspect Tooth Contact between Main Gear and Drive Pinion TiresWear/InflationLug NutTorque Requirements Start all wheel lug nuts by handKeep Hands SuspensionMixer Storage EM-70 PLASTER/MORTAR Mixer -TROUBLESHOOTING Engine Engine TroubleshootingEM-70 PLASTER/MORTAR Mixer -TROUBLESHOOTING Engine WhiteEM-70PLASTER/MORTARMIXER-TROUBLESHOOTINGMIXER/ELECTRICMOTOR EM-70 PLASTER/MORTAR Mixer -WIRING Diagram Electric Motor Page Multiquip INC

EM-70S, EM-70P specifications

The Multiquip EM-70P and EM-70S are two robust and versatile electric generators designed to provide reliable power for various applications, ranging from construction sites to special events. Both models are renowned for their performance, durability, and efficiency, catering to the needs of contractors, event organizers, and outdoor enthusiasts alike.

One of the standout features of the EM-70P and EM-70S is their powerful engine. The EM-70P is equipped with a 7,000-watt gasoline engine, while the EM-70S comes with a 7,000-watt propane engine. This dual-fuel capability of the EM-70S not only enhances flexibility but also promotes cleaner and more efficient energy consumption. Both generators feature a heavy-duty steel frame that ensures maximum durability and protection against the rigors of job sites.

Technologically, these generators are designed with advanced noise reduction features. The low-noise operation makes them suitable for use in noise-sensitive environments, such as residential areas and events, allowing users to work or host gatherings without disturbing neighbors. Additionally, the EM-70P and EM-70S are equipped with an easy-to-read control panel, featuring circuit breakers and outlets that include multiple 120V and 240V options, ensuring compatibility with a wide range of tools and equipment.

Another notable characteristic of the EM-70P and EM-70S is their portability. Both models come with sturdy wheels and a foldable handle, making them easy to transport on job sites or during events. Their compact size does not compromise power output, as they can easily handle the demands of multiple tools and devices simultaneously.

Safety is also prioritized in the design of these generators. They feature a low-oil shutdown system which automatically turns off the engine when oil levels are critically low, preventing potential damage. Furthermore, the generators are designed to withstand harsh weather conditions, providing peace of mind to users who require dependable power in any environment.

In summary, the Multiquip EM-70P and EM-70S generators combine powerful performance, noise-reduction technology, user-friendly controls, and safety features. Whether you need a reliable power source for construction, outdoor events, or emergency backup, these generators present an ideal solution that meets diverse power needs efficiently and effectively.
Top Page Image Contents