Operating Instructions Safety Instructions
Using the oven controls.
Control Graphics for JCBP270 Model.
Oven Control, Clock and Timer Features and Settings
Consumer Support Troubleshooting Tips Care and Cleaning
BAKE Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode you can change the oven temperature at this point. Glows when the oven is in bake mode.
START/ON Pad
Must be touched to start any cooking or cleaning function.
Display
Shows the time of day, oven temperature, whether the oven is in the bake, broil or
If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.
The time of day will flash in the display when there has been a power outage. Reset the clock.
If the function error code appears during the
10
Touch the OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the range and call for service.
TIMER Pad
Touch this pad to select the timer feature.
Then touch the + and – pads to adjust the timer.
TIMER Light
Flashes while in edit mode you can change the set time at this point. Glows when the timer has been activated. Flashes again when the time has run out until the control is reset.
CLOCK Pad
To set the clock, press this pad twice and then press the + and – pads. The time of day will flash in the display when the oven is first turned on.
START TIME Pad (on some models)
Use along with the COOK TIME or CLEAN pads to set the oven to start and stop automatically at a time you set.
START TIME Light
Flashes while in edit mode you can change the start time at this point. Glows when the function has been activated.
COOK TIME Pad (on some models)
Touch this pad and then touch the + or – pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.
COOK TIME Light
Flashes while in edit mode you can change the set time at this point. Glows when the function has been activated. Flashes again when the time has run out until the control is reset.