Instructions
Using the clock, timer and convenience outlet. (on some models)
Not all features are on all models.
Safety
To Reset the Timer
If the display is still showing the time remaining, you may change it by touching the TIMER pad, then touch the + or – pads until the time you want appears in the display.
If the remaining time is not in the display (clock, delay start or cooking time are in the display), recall the remaining time by touching the TIMER pad and then touching the + or – pads to enter the new time you want.
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions
To Cancel the Timer
Touch the TIMER pad twice.
End of Cycle Tones (on some models)
Clear the tones by pressing the pad of the function you are using.
OR
Power Outage
If a flashing time is in the display, you have | To reset the clock, touch the CLOCK pad |
experienced a power failure. Reset the clock. | twice. Enter the correct time of day by |
| touching the + or – pads. Touch the |
| START/ON pad. |
Convenience Outlet (on some models)
The 120V convenience outlet located | To reset the circuit breaker, press |
on the top of the backguard may be used | the switch located near the outlet |
to plug in small electrical appliances. | on top of the backguard. |
When using the outlet, be sure that |
|
the electrical cord does not rest on or near |
|
a surface unit. If the surface unit is turned |
|
on, the cord will be damaged. |
|
16