Mitsubishi Electronics MR-G50J-SS-NZ manual Tank holder, Door switch, Ceiling of versa compartment

OPERATING PROCEDURE	PHOTOS
4. Parts inside the refrigerator compartment ➔ Left rail of the	Photo 12
slide compartment ➔ Parts inside the ice making compart-	Tank holder
ment ➔ Ice making compartment door ➔ Tank holder ➔
Door switch	Door switch
(1)Remove the parts inside the refrigerator compartment.
(See procedure [2])	Label
(2)Remove the left rail of the slide compartment.
	Tank window
(See procedure [2])
(3)Remove the parts inside the ice making compartment.
(See procedure [3])
(4)Remove the ice making compartment door.
Tank holder	Screw A
(5)Remove a screw on the side of the refrigerator compartment.
(6)Remove label and screw A (two screws). Pull the tank window.	Figure 2
(7)Loosen screw A (three screws) halfway on the side of the ice
making compartment. Put a screwdriver on the head of each
screw and top the bottom side of the holder softly to detach it.
(See photo 12)
(8)Lift up the tank holder from the refrigerator compartment to
remove it.
Note:	Tank holder
1Put the lead wires in place so that they do not get caught in
water supply channel.
2Put the tank holder in place so that the water does not leak from
it.

Door switch

(9)Insert a minus screwdriver between switch and body to remove the door switch.

Photo 13

5.Parts inside the versa compartment ➔ Ceiling of versa

compartment

(1)Take out interior parts of versa compartment. (2)Lift up and pull out the versa-compartment door.

Ceiling of versa compartment	Rivet F			Rivet F
(3)To detach the ceiling, remove rivet F (three rivets) and pull			Rivet F
down the ceiling.
(See photo 13)
		Ceiling of versa compartment

Caution on assembly

1Be sure that all the parts are fitted securely in place.

37