U-Line CLRCO2075 manual Full Overlay Door Panel

Page 8

CLRCO2075 — Clear Ice Maker/Refrigerator

 

 

 

Figure 12

Figure 13

Full Overlay Door Panel

Door Panel Preparation

A full overlay door panel completely covers the doorframe and handle to give a built-in appearance. See your U-Line dealer for the optional Full Overlay Door Panel Kit (P/N U-OL2075B — Black or P/N U-OL2075W — White). Appropriate hardware, Modified Handle, Replacement Hinges and a copy of these instructions will be included in the kit.

1.Cut the overlay to the following dimensions (see Figure 15).

Full Overlay Dimensions:

3.Pull door gasket out of groove (top edge of door only). Start in the middle and pull outward, moving toward the edge (see Figure 13). This may take some force. Do not remove the three screws behind gasket.

4.Remove two outside screws holding door handle. Slightly separate door handle from door (see Figure 14).

5.Pull handle up and off.

6.Remove and discard existing panel and cardboard spacer.

7.Slide custom door panel insert into 1/4-inch channel in door front.

8.Holding door gasket out

of the way, replace handle

Figure 14

on door, making sure it is

 

seated properly on insert

 

and that screw holes

 

line up.

 

9.Install two small screws removed in Step 4.

10.Starting at the corners and working inward, push door gasket into place on door.

11.Place door on bottom hinge pin and install upper hinge screw.

12.Reinstall the door shelves by lining up the bosses and first pushing straight in, then down at a 45° angle (see Figure 45 on Page 18). Go on to 5 Adjust Door.

Width: 23-3/4"

Height: 29-7/8"

The door panel must not weigh more than 20 lbs.

3/4"

 

13/16"

 

1/8"

 

1/8"

 

Relief Notch

 

for Pivot Plate

 

Rear View

29-7/8"

of

Wood Panel

 

23-3/4"

 

Figure 15

 

IMPORTANT

Rear View of wood panel for right-hand hinge shown. Use mirror image for left-hand hinges.

2.Create a relief (Figure 15) for pivot plate by cutting notch in top corner and coinciding back corner of overlay panel. Refer to Figure 16 for exact specifications.

www.U-LineService.com

8

02/2005

Image 8
Contents CLRCO2075 Clear Ice Maker/Refrigerator Contents Follow Safety PrecautionsGeneral Precautions Inspect and PlanTools/Materials Required InspectionExterior Cleaning Cut-Out DimensionsPrepare Site Black and White ModelsProduct Dimensions Door Swing/Clearances Information Reversing the DoorPower Supply Other Site RequirementsWater Supply DrainSide-By-Side Installation Instructions Prepare and Install Door PanelDoor Panel Installation Custom 1/4 Door Panel InsertFull Overlay Door Panel Installation Instructions Removing Existing DoorAttaching the Full Overlay Panel BottomInstalling the Door Assembling the DoorAdjusting Door Alignment Adjust DoorChecking Door Alignment To 6 Prepare PlumbingFactory-Installed Drain Pump Drain ConnectionPrepare Plumbing Gravity DrainRemove 12 screws and back panel Locally-Installed Drain Pump Water Supply ConnectionGo on to 7 Prepare Power Supply Electrical SpecificationsPrepare Power Supply Level the Unit Leveling InformationInstallation of the CLRCO2075 Installation TroubleshootingInstall the Unit Relocating the ShelvesTemperature Controller Other SettingsInitial Start-Up Start-Up for the First TimeStart-Up Troubleshooting Service Information Who to Call
Related manuals
Manual 48 pages 63.53 Kb

CLRCO2075 specifications

The U-Line CLRCO2075 is a high-performance undercounter refrigerator that stands out for its sleek design and versatile functionality. Tailored for both residential and commercial use, this unit exemplifies quality craftsmanship. With a contemporary stainless-steel finish, it seamlessly integrates into any modern kitchen or bar area, elevating the overall aesthetic.

One of the standout features of the CLRCO2075 is its generous storage capacity. It boasts an impressive 5.2 cubic feet of internal space, which can accommodate a wide array of beverages and food items. The refrigerator is designed with adjustable shelves, allowing users to customize the layout to fit their specific storage needs. This flexibility is complemented by a uniquely designed door, which includes a full-length glass panel that not only enhances visibility but also adds a touch of elegance.

Equipped with advanced cooling technologies, the U-Line CLRCO2075 ensures that items are kept at optimal temperatures. The unit employs a dynamic cooling system, which allows it to cool down rapidly and maintain consistent temperatures throughout the interior. This technology ensures that beverages remain refreshingly cold, making it an ideal choice for entertaining guests.

The U-Line CLRCO2075 features user-friendly controls, including a digital touchpad that provides precise temperature settings and easy access to additional functionalities. This includes an integrated alarm system that alerts users if the door is left ajar, which helps to prevent temperature fluctuations and conserve energy.

Another notable characteristic of this refrigerator is its energy efficiency. Designed with eco-friendly principles in mind, the CLRCO2075 meets stringent Energy Star ratings, contributing to reduced energy consumption. This helps not only in lowering electric bills but also in promoting sustainable living practices.

In summary, the U-Line CLRCO2075 is a remarkable addition to any space, combining style, performance, and efficiency. Its ample storage, advanced cooling technologies, user-friendly features, and energy-efficient design make it an excellent choice for those seeking a reliable undercounter refrigerator. Whether for personal or professional use, it meets diverse refrigeration needs while enhancing the overall look of your environment.