U-Line 2075WCOL manual Go on to 5 Adjust Door

Page 11

2075WC/2075WCOL Wine Captain®

 

 

Tape

Door

 

Frame

 

Overlay

 

Frame

Figure 20

 

3.Secure the front of the door to the back of the overlay frame using tape on all four corners, as shown in Figure 20. Make sure all four edges are aligned.

Note: The door frame is designed with a slight amount of “play” to square it to the overlay frame.

6.Remove all traces of tape securing overlay frame to door frame.

7.Starting at the corners and working toward the center, push the door gasket back into place. Make sure gasket is seated on all four sides.

Installing the Door

IMPORTANT

Pivot posts must be clean. Closers must also be clean and greased to ensure proper operation.

1.Insert pivot post into bottom hinge, making sure to tighten only until post is level with outside of hinge.

2.Install door closer. See Figure 26 on Page 12. Be sure that bosses on closers align with holes in hinge.

Pivot Post

Rear View

of

Door and

Overlay Frame

Punch Pilot Holes for use with #6 x 1" Pan-head Screws – 10 Places

Top Pivot Plate

Figure 21

4.Place door and overlay frame on a flat, clean protective surface. Use the door frame holes as a guide to lightly punch pilot holes for the #6 x 1" pan-head screws. See Figure 21.

5.Attach the door to the overlay frame using the #6 x 1" wood screws.

IMPORTANT

If you decide to drill pilot holes, remove the door and do not use a drill bit larger than 7/64". Do not drill deeper than 3/8". Door frame and overlay frame must be aligned properly or the door will not operate correctly.

Figure 22

3.Holding door upright with top of door tilted forward, place hole of pivot plate onto bottom hinge screw pin. Be sure that bosses on closers align with holes in pivot plate.

4.Tilt top of door into position and install top hinge screw pin. See Figure 22. Tighten only until post is level with top of hinge.

5.Go on to 5 Adjust Door.

02/2005

11

www.U-LineService.com

Image 11
Contents 2075WC Wine Captain 2075WCOL Wine Captain with Overlay Follow Safety Precautions ContentsInspection General PrecautionsInspect and Plan Tools/Materials RequiredPrepare Site Exterior CleaningCut-Out Dimensions Reversing the Door Product DimensionsDoor Swing/Clearances Information Environmental Requirements Power SupplyOther Site Requirements Prepare Racks and Door Frame Side-By-Side Installation InstructionsAdding a Final Finish Coat to Wood Trim Frame Preparation Staining Wood Trim a Different ColorOverlay Frame Typical routing dimensions are shown in Figure Preparing Door Installation InstructionsGo on to 5 Adjust Door Checking Door Alignment Adjusting Door AlignmentAdjust Door Leveling Information Electrical SpecificationsInstallation Tip Prepare Power SupplyInstall the Unit Anti-Tip Bracket InstallationStart-Up for the First Time Installation TroubleshootingInitial Start-Up Start-Up Troubleshooting Who to Call Service Information

2075WCOL, 2075WC specifications

The U-Line 2075WC and 2075WCOL are premium compact wine coolers designed to provide an optimal environment for wine storage. These models exemplify the blending of cutting-edge technology with elegant design, making them an ideal solution for wine enthusiasts and connoisseurs alike.

One of the standout features of these wine coolers is their ability to store up to 24 bottles of wine, allowing users to create their very own curated collection at home. The interior is designed to accommodate various bottle shapes, including larger formats, ensuring versatility and maximizing storage efficiency. The adjustable, removable shelves enable customization based on individual preferences and varying bottle sizes.

In terms of temperature control, the U-Line 2075WC and 2075WCOL utilize innovative cooling technology. They are equipped with an advanced digital touch pad that allows for precise temperature settings between 38°F and 65°F, which is crucial for preserving and enhancing the flavor profiles of different wines. The dual-zone feature of the 2075WCOL variant allows users to set distinct temperatures for red and white wines, ensuring that each type is stored under optimal conditions.

These wine coolers also feature energy-efficient performance, meeting or exceeding ENERGY STAR standards. This not only aids in reducing the carbon footprint but also contributes to lower energy bills for consumers, making them an environmentally responsible choice.

Aesthetic appeal is another key characteristic of the U-Line 2075 models. The sleek stainless steel frame, combined with low-E tempered glass doors, allows for a stylish display of the wine collection while providing essential UV protection. The soft interior LED lighting enhances visibility without compromising the quality of the wine, creating an inviting ambiance.

The quiet and efficient operation of the U-Line 2075WC and 2075WCOL is another point of excellence, utilizing a forced-air refrigeration system, which enhances the temperature stability throughout the cabinet. Vibrations are minimized, ensuring that the wine is stored in conditions that won’t disturb or alter the delicate chemical balance of the bottles.

In summary, the U-Line 2075WC and 2075WCOL wine coolers stand out for their combination of aesthetic design, advanced temperature control features, versatile storage options, and energy efficiency. These models are a top choice for anyone seeking a reliable and beautiful home for their wine collection, elevating the wine storage experience to new heights.