U-Line 2075WCOL manual Anti-Tip Bracket Installation, Install the Unit

Page 14

2075WC/2075WCOL Wine Captain®

 

 

8 Install the Unit

Anti-Tip Bracket Installation

1.Locate two Anti-Tip Brackets included inside the unit.

2.Place the unit into the area where it will be installed. Check the door, sides and top for a proper fit. Also test to make sure the door opens and closes freely.

3.Remove grill and place a mark on the floor at the front of the unit. Also place a mark on the floor in the center of the unit. See Figure 30.

Marks on Floor

Figure 30

4.Remove the unit. Using a square, extend a centerline 20-1/4" toward the back wall. See Figure 31. At the back of the centerline, mark a line that measures

11-1/16" to the left and right. This line serves as the back edge for the Anti-Tip Brackets and its furthest points mark the outer edge of each bracket.

Note: Instructions are shown for built-in installation. Use same dimensions for free-standing installation.

 

 

Back

Line Marks

 

 

Back

Front

 

Wall

 

of Unit

 

 

of Unit

 

 

 

 

 

 

20-1/4"

Marks

11-1/16"

 

11-1/16"

on Floor

 

 

 

Centerline

Figure 31

 

 

 

5.Place the Anti-Tip Brackets on the floor against the line drawn for the outer edge. Mark spots for the screw holes. See Figure 32.

Drill Holes and

Mount Anti-Tip

Brackets to Floor

Back

Wall

Back

of Unit

Front

of Unit

Figure 32

6.Use a 1/8" drill to make two starter holes and fasten the Anti-Tip Brackets to the floor using the screws provided.

CAUTION

Other hardware is required for floors made of materials other than wood.

7.Place the unit back into position, making sure the feet engage the Anti-Tip Brackets properly. Check the alignment of the lines made on the floor in Step 3 with the position of the front feet to ensure proper positioning.

www.U-LineService.com

14

02/2005

Image 14
Contents 2075WC Wine Captain 2075WCOL Wine Captain with Overlay Contents Follow Safety PrecautionsTools/Materials Required General PrecautionsInspect and Plan InspectionPrepare Site Exterior CleaningCut-Out Dimensions Reversing the Door Product DimensionsDoor Swing/Clearances Information Environmental Requirements Power SupplyOther Site Requirements Prepare Racks and Door Frame Side-By-Side Installation InstructionsAdding a Final Finish Coat to Wood Trim Frame Preparation Staining Wood Trim a Different ColorOverlay Frame Typical routing dimensions are shown in Figure Installation Instructions Preparing DoorGo on to 5 Adjust Door Checking Door Alignment Adjusting Door AlignmentAdjust Door Prepare Power Supply Electrical SpecificationsInstallation Tip Leveling InformationAnti-Tip Bracket Installation Install the UnitStart-Up for the First Time Installation TroubleshootingInitial Start-Up Start-Up Troubleshooting Service Information Who to Call

2075WCOL, 2075WC specifications

The U-Line 2075WC and 2075WCOL are premium compact wine coolers designed to provide an optimal environment for wine storage. These models exemplify the blending of cutting-edge technology with elegant design, making them an ideal solution for wine enthusiasts and connoisseurs alike.

One of the standout features of these wine coolers is their ability to store up to 24 bottles of wine, allowing users to create their very own curated collection at home. The interior is designed to accommodate various bottle shapes, including larger formats, ensuring versatility and maximizing storage efficiency. The adjustable, removable shelves enable customization based on individual preferences and varying bottle sizes.

In terms of temperature control, the U-Line 2075WC and 2075WCOL utilize innovative cooling technology. They are equipped with an advanced digital touch pad that allows for precise temperature settings between 38°F and 65°F, which is crucial for preserving and enhancing the flavor profiles of different wines. The dual-zone feature of the 2075WCOL variant allows users to set distinct temperatures for red and white wines, ensuring that each type is stored under optimal conditions.

These wine coolers also feature energy-efficient performance, meeting or exceeding ENERGY STAR standards. This not only aids in reducing the carbon footprint but also contributes to lower energy bills for consumers, making them an environmentally responsible choice.

Aesthetic appeal is another key characteristic of the U-Line 2075 models. The sleek stainless steel frame, combined with low-E tempered glass doors, allows for a stylish display of the wine collection while providing essential UV protection. The soft interior LED lighting enhances visibility without compromising the quality of the wine, creating an inviting ambiance.

The quiet and efficient operation of the U-Line 2075WC and 2075WCOL is another point of excellence, utilizing a forced-air refrigeration system, which enhances the temperature stability throughout the cabinet. Vibrations are minimized, ensuring that the wine is stored in conditions that won’t disturb or alter the delicate chemical balance of the bottles.

In summary, the U-Line 2075WC and 2075WCOL wine coolers stand out for their combination of aesthetic design, advanced temperature control features, versatile storage options, and energy efficiency. These models are a top choice for anyone seeking a reliable and beautiful home for their wine collection, elevating the wine storage experience to new heights.