U-Line 2075WCOL manual Checking Door Alignment, Adjusting Door Alignment, Adjust Door

Page 12

2075WC/2075WCOL Wine Captain®

 

 

5 Adjust Door

Checking Door Alignment

The unit’s door is aligned at the factory before shipment. However, its alignment could have been disturbed during shipment or during overlay frame installation.

IMPORTANT

Properly aligned, the door should be 1/8" below the top of the unit’s cabinet, NOT flush with the top (see Figure 23).

1/8"

Figure 23

1.Compare the top edge of the door to the top edge of the cabinet.

2.If the door edge is 1/8" below and parallel to the top of the cabinet, go on to 6 Prepare Power Supply. If it is not, note whether the side opposite the hinge needs to be moved UP or DOWN, and use the following procedure.

Slotted

 

Mounting

 

Holes

Angled Edge

 

 

Towards Center

 

of Door

Raise

Lower

Outside

Outside

Door Edge

Door Edge

Figure 25

 

3.See Figure 25. If the top far edge of the door needs to move UP, move the hinge plate toward the outside of the door and retighten screws. If the top far edge of the door needs to move DOWN, move the hinge plate toward the inside of the door and retighten screws.

4.Mount the door to recheck alignment and repeat Steps 2 and 3 if further adjustment is necessary.

5.When top edge of door is parallel to top edge of cabinet, remove the door and ensure the two screws are secure.

6.Remove the door closers from the bottom hinge, clean thoroughly and lubricate the mating surfaces with petroleum jelly.

Adjusting Door Alignment

1.Remove top hinge screw pin (7/64" Allen wrench or Phillips screwdriver,

depending on your unit’s construction, see Figure 24). Remove door by tilting forward and lifting off bottom hinge pin.

7.Reinstall the closers, lining up the bosses with holes in hinge and hinge plate (see Figure 26).

8.Mount the door, install top hinge pivot pin and go on to 6 Prepare Power Supply.

Door

Closer

Inserts

Boss

Figure 26

2. With door upside-down, loosen but do not remove

Figure 24

the two screws on the door’s bottom hinge plate.

www.U-LineService.com

12

02/2005

Image 12
Contents 2075WC Wine Captain 2075WCOL Wine Captain with Overlay Contents Follow Safety PrecautionsGeneral Precautions Inspect and PlanTools/Materials Required InspectionExterior Cleaning Cut-Out DimensionsPrepare Site Product Dimensions Door Swing/Clearances InformationReversing the Door Power Supply Other Site RequirementsEnvironmental Requirements Side-By-Side Installation Instructions Adding a Final Finish Coat to Wood TrimPrepare Racks and Door Frame Staining Wood Trim a Different Color Overlay FrameFrame Preparation Typical routing dimensions are shown in Figure Installation Instructions Preparing DoorGo on to 5 Adjust Door Adjusting Door Alignment Adjust DoorChecking Door Alignment Electrical Specifications Installation TipPrepare Power Supply Leveling InformationAnti-Tip Bracket Installation Install the UnitInstallation Troubleshooting Initial Start-Up Start-Up TroubleshootingStart-Up for the First Time Service Information Who to Call

2075WCOL, 2075WC specifications

The U-Line 2075WC and 2075WCOL are premium compact wine coolers designed to provide an optimal environment for wine storage. These models exemplify the blending of cutting-edge technology with elegant design, making them an ideal solution for wine enthusiasts and connoisseurs alike.

One of the standout features of these wine coolers is their ability to store up to 24 bottles of wine, allowing users to create their very own curated collection at home. The interior is designed to accommodate various bottle shapes, including larger formats, ensuring versatility and maximizing storage efficiency. The adjustable, removable shelves enable customization based on individual preferences and varying bottle sizes.

In terms of temperature control, the U-Line 2075WC and 2075WCOL utilize innovative cooling technology. They are equipped with an advanced digital touch pad that allows for precise temperature settings between 38°F and 65°F, which is crucial for preserving and enhancing the flavor profiles of different wines. The dual-zone feature of the 2075WCOL variant allows users to set distinct temperatures for red and white wines, ensuring that each type is stored under optimal conditions.

These wine coolers also feature energy-efficient performance, meeting or exceeding ENERGY STAR standards. This not only aids in reducing the carbon footprint but also contributes to lower energy bills for consumers, making them an environmentally responsible choice.

Aesthetic appeal is another key characteristic of the U-Line 2075 models. The sleek stainless steel frame, combined with low-E tempered glass doors, allows for a stylish display of the wine collection while providing essential UV protection. The soft interior LED lighting enhances visibility without compromising the quality of the wine, creating an inviting ambiance.

The quiet and efficient operation of the U-Line 2075WC and 2075WCOL is another point of excellence, utilizing a forced-air refrigeration system, which enhances the temperature stability throughout the cabinet. Vibrations are minimized, ensuring that the wine is stored in conditions that won’t disturb or alter the delicate chemical balance of the bottles.

In summary, the U-Line 2075WC and 2075WCOL wine coolers stand out for their combination of aesthetic design, advanced temperature control features, versatile storage options, and energy efficiency. These models are a top choice for anyone seeking a reliable and beautiful home for their wine collection, elevating the wine storage experience to new heights.