Side-By-Side Installation Instructions

™	2075WC/2075WCOL Wine Captain®

4 Prepare Racks and Door Frame

For a complete refreshment center, install your 2075WC or 2075WCOL unit beside a U-Line Refrigerator, Ice Maker or Combo Model (see Figure 11 for typical cut-out). Note that each Side-By-Side Installation will be different.

•Cut-out width for a side-by-side installation is the total of the widths listed under Cut-Out Dimensions in each unit’s Installation Guide.

For example:

Placing a 2075 Wine Captain® next to a 2015 series unit would require a cut-out width of:

24-3/16" + 15-3/16" = 39-3/8"

Placing a 2075 Wine Captain® next to a 2075 series unit would require a cut-out width of:

24-3/16" + 24-3/16" = 48-3/8"

•No trim kit is required. However, 1/4-inch space needs to be maintained between the units to ensure unobstructed door swing.

•Units must operate from separate, properly grounded electrical receptacles placed according to each unit’s Electrical Specifications.

Typical Side-By-Side Cut-Out

The U-Line Wine Captain® is equipped with wood- trimmed wine racks that are coated at the factory with a clear vinyl sealer, which will adequately protect the wood in normal usage. A final finish coat was not applied so that the wood trim could be stained to match décor or overlay frame. The trim on the racks may be coated with a final finish or stained.

2075WCOL Models are designed for, and require installation of, an Overlay Frame.

If none of these treatments are to be included in this installation, go on to 5 Adjust Door.

CAUTION

To prevent permanent damage to the inner liner of the Wine Captain®, the wine rack wood trim MUST be removed from the unit for staining and/or finishing. Allow stain/finish to dry thoroughly (at least 24 hours per coat) in accordance with the stain/finish manufacturer’s instructions prior to re-installing the wood trim inside the cabinet of the Wine Captain®. Failure to do so may cause the inner liner of the unit to have a permanent odor, which is not covered by the warranty.

Adding a Final Finish Coat to Wood Trim

34-1/4"	23-1/4"
to
35-1/8"	7"
	7"
1/4" Space
Between	1-1/2"
Appliances
Figure 11

1.Remove each wine rack by sliding it out and up. See Figure 12.

2.Remove and save screws securing wood trim to the racks.

3.Lightly scruff sand the wood trim with 280 grit 3M Tri-M-Ite sandpaper.

4.Remove sanding dust with a tack cloth.

Slide Out

and Up

Figure 12

5.Apply a thin coat of Minwax Polycrylic, following container label for directions. Allow to dry 24 hours.

6.Lightly sand, tack and reapply 2 times, if desired.

7.Allow the final coat to dry for 24 hours.

8.Reinstall wood trim to wine racks using screws removed in Step 2.

9.Reinstall wine racks in unit.

10.For 2075WC units, go on to 5 Adjust Door.

02/2005

www.U-LineService.com

2075WCOL, 2075WC specifications

The U-Line 2075WC and 2075WCOL are premium compact wine coolers designed to provide an optimal environment for wine storage. These models exemplify the blending of cutting-edge technology with elegant design, making them an ideal solution for wine enthusiasts and connoisseurs alike.

One of the standout features of these wine coolers is their ability to store up to 24 bottles of wine, allowing users to create their very own curated collection at home. The interior is designed to accommodate various bottle shapes, including larger formats, ensuring versatility and maximizing storage efficiency. The adjustable, removable shelves enable customization based on individual preferences and varying bottle sizes.

In terms of temperature control, the U-Line 2075WC and 2075WCOL utilize innovative cooling technology. They are equipped with an advanced digital touch pad that allows for precise temperature settings between 38°F and 65°F, which is crucial for preserving and enhancing the flavor profiles of different wines. The dual-zone feature of the 2075WCOL variant allows users to set distinct temperatures for red and white wines, ensuring that each type is stored under optimal conditions.

These wine coolers also feature energy-efficient performance, meeting or exceeding ENERGY STAR standards. This not only aids in reducing the carbon footprint but also contributes to lower energy bills for consumers, making them an environmentally responsible choice.

Aesthetic appeal is another key characteristic of the U-Line 2075 models. The sleek stainless steel frame, combined with low-E tempered glass doors, allows for a stylish display of the wine collection while providing essential UV protection. The soft interior LED lighting enhances visibility without compromising the quality of the wine, creating an inviting ambiance.

The quiet and efficient operation of the U-Line 2075WC and 2075WCOL is another point of excellence, utilizing a forced-air refrigeration system, which enhances the temperature stability throughout the cabinet. Vibrations are minimized, ensuring that the wine is stored in conditions that won’t disturb or alter the delicate chemical balance of the bottles.

In summary, the U-Line 2075WC and 2075WCOL wine coolers stand out for their combination of aesthetic design, advanced temperature control features, versatile storage options, and energy efficiency. These models are a top choice for anyone seeking a reliable and beautiful home for their wine collection, elevating the wine storage experience to new heights.