Product Dimensions, Reversing the Door

Figure 4

™	2015WC/2015WCOL Wine Captain®

Product Dimensions

23-1/4"	25-3/8"
Including	Including
Handle	Handle
34-1/8"	34-1/8"
14-15/16"	14-15/16"
Black and White	Stainless Steel
23-1/4"
Including
Wood Overlay
	34-1/8"
14-15/16"
Wood Overlay
Figure 2

Please note that the unit has adjustable feet that can add one additional inch to height during leveling or to match adjacent cabinets (see Figure 29 on Page 13).

Door Swing/Clearances Information

Black, White and Wood Overlay units have a zero clearance for the door to open 90° (see Figure 3). Stainless Steel models require a minimum of 2-1/8" door clearance to accommodate the handle if the unit is installed next to a wall or similar type of structure.

Wall	Wall
1/4" Min.	2-1/8" Min.
21"	21"
16-1/2"	16-1/2"
90°	90°
Door Swing	Door Swing
Black, White and Wood Overlay	Stainless Steel
Figure 3

Reversing the Door

(Black and White Units Only)

All U-Line units (except Stainless Steel models) may be left- or right-hand opening. The door opening is easily reversed by moving the hinge hardware to the opposite side. The top hinge hardware will be used on the bottom of the other side and the bottom hinge hardware will be used on the top of the other side (see Figure 4).

To reverse the door:

1.Remove top hinge screw pin from door (7/64" Allen wrench or Phillips

screwdriver, depending on your unit’s

construction) (see Figure 5). Remove door by tilting forward and lifting off bottom hinge pin.

02/2005