Smeg LSA6047X instruction manual Troubleshooting, Code Phases Lights Description

Page 15

User instructions

2. Troubleshooting

In case of a malfunction, the dishwasher will identify the program by switching on a combination of lights.

When an alrm is present, all the PROGRAM lights (7) come on, while the PHASES/PROGRAM lights (10) identify the error code:

CODE		PHASES LIGHTS			DESCRIPTION

E1				The	anti-flooding system (if installed) has been
E1				tripped.
				tripped.


E2				The system which limits the water level inside the
E2				dishwasher (safety unit) has been tripped.
				dishwasher (safety unit) has been tripped.


E3				The appliance cannot heat the water.


E4				Temperature sensor disconnected.


E5				The appliance is not able to take in water.


E6				The appliance is not able to pump out the water
E6				from the tank.
				from the tank.


E7				The appliance is not able to measure the amount
E7				of water loaded accurately (on models with turbine
				flow-regulator only).

E8				Anomaly in the system which distributes water to
E8				the basket (where installed).
				the basket (where installed).


E9				The maximum level of water for loading has been
E9				exceeded (on models with turbine flow-regulator
				only).

Image 15

Contents Guide for Using the Dishwasher and the Washing Programs Contents Front panel Description of the controlsFor AAA 12 place-settings models only see energy label For AAB 12 place-settings models only see energy label For AAB 14 place-settings models only see energy label Washing programs Table for Certification BodiesLighting Programming Selection ProgramStart Program END Program Interruption of a ProgramTo Change a Program Half Load Wash Function on some models only Annulling a ProgramDelay Program on some models only User instructions Removing the Dishes To Save on ENERGY! … and Protect the EnvironmentWater Hardness Table Adjusting the Water Softening SystemCode Phases Lights Description TroubleshootingFor Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Water supply connection Installation and hook-upConnecting to the Water Supply Electrical connectionDrain Connection Operating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLoading the Lower Basket Lower BasketCutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketCleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Technical Data