User instructions
"3/1" OPTION BUTTON (on some models only) (available in all programs except the soak program)
Pressing this button (4) activates the "3/1" option; the relative light comes on to confirm the selection.
This option is specifically for the use of tablet or powder detergents which already contain salt and rinse aid. If you decide to use a product of this kind, press the button to allow the dishwasher to vary the necessary parameters to ensure the best washing results by making full use of the quantities of detergent, salt and rinse aid these special products contain. At the end of the cycle, the appliance automatically presets for the use of conventional products.
DELAY PROGRAM (on some models only)
The PROGRAM DELAY button (3) can be pressed to delay the start of the washing program by 3, 6 or 9 hours. This function allows you to set the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the "program delay" set previously will come into effect (the light corresponding to 3, 6 or 9 hours flashes).
To reset or change the delay once the program has started:
•press the START/PAUSE button (5) for a few seconds, until the PHASES/PROGRAM lights (10) come on;
•press the DELAY PROGRAM button (3) several times “until the program delay” returns to zero (all the lights indicating the delay go out);
•press the START/PAUSE button (5) to start the new program.