User instructions
PROGRAMMING
In this model of dishwasher, all programming procedures can only be carried out with the door closed. As long as the door is open, the PROGRAMS lights (7) and PHASES/PROGRAM lights (10) will remain off.
SELECTION PROGRAM
The program selection is possible through the relative buttons (2).
When the button relating to the program required is pressed, the relative light will come on to confirm the operation.
START PROGRAM
To start the dishwasher, press the START/PAUSE button (5) for a few seconds, until the light of the first phase of the selected program starts to flash (confirmation beep).
This phase, that updates itself during the cycle, is “indicative” since it is influenced by the washing conditions such as dishwasher type and quantity, entry temperature etc. For this reason it is normal to see the updating during a program (increment and decrease of minutes) specially in the passage from one phase to the other (for example, from washing to rinse).
As the program runs, the PHASES/PROGRAM lights (10) will indicate the current cycle status.
Prewash
Wash
|
|
| The light of the phase in progress will |
|
|
| flash, while the lights of the previous and |
Rinse |
| subsequent phases remain on. | |
|
| Dry | N.B. during execution of programs which |
|
|
| |
|
|
| |
|
|
| do not include a prewash, the first |
|
|
| PHASES/PROGRAM light (10) will remain |
|
|
| off. |