Smeg LSA6047X instruction manual Before Starting the Dishwasher After Prolonged Disuse

Page 38

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

•Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes.

•Plug the power cord back into the socket.

•Reconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

•the dishwasher is connected to the electrical power supply;

•there is no power failure;

•the water tap is open;

•the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

•the drain hose is not kinked;

•the drain siphon is not obstructed;

•the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

•the correct amount of detergent has been added;

•there is regenerating salt inside the special container;

•the dishes are being loaded correctly;

•the selected program is suitable for the dish types and their degree of soiling;

•all the filters are clean and positioned correctly;

•the spray arm nozzles are not obstructed;

•there is no object obstructing the rotation of the spray arms.

Image 38

Contents Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Front panelFor AAA 12 place-settings models only see energy label For AAB 12 place-settings models only see energy label For AAB 14 place-settings models only see energy label Lighting Washing programsTable for Certification Bodies Start Program ProgrammingSelection Program To Change a Program END ProgramInterruption of a Program Annulling a Program Half Load Wash Function on some models onlyDelay Program on some models only User instructions To Save on ENERGY! … and Protect the Environment Removing the DishesAdjusting the Water Softening System Water Hardness TableTroubleshooting Code Phases Lights DescriptionFor Cleaning Dishwashers Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up Water supply connectionDrain Connection Connecting to the Water SupplyElectrical connection Using the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent Products General warnings and recommendations User instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower BasketCutlery Basket Upper Basket Loading the Upper Basket Adjusting the Upper Basket Pull-out versionCleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Technical Data