Smeg NCT685BHK, NCT685CHK, NCT685BSG manual Introduction

Page 3

Introduction

THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASING MUST NOT BE REMOVED.

BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDER THE HOB.

DO NOT PUT PANS WITHOUT PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE COOKING HOB GRIDS.

DO NOT USE PANS OR GRIDDLE PLATES THAT EXTEND BEYOND THE EXTERNAL PERIMETER OF THE HOB.

THE HOB IS TO BE USED BY ADULTS ONLY. DO NOT LET UNSUPERVISED CHILDREN PLAY WITH THE HOB.

REPLACED APPLIANCES MUST BE TAKEN TO A SPECIAL GARBAGE COLLECTION CENTRE.

The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance or by the use of non-original spares.

5

Image 3

Contents Contents Instructions for Safe and Proper USE IntroductionIntroduction Instructions for the installer Positioning of the HOBAttachment to support structure Electrical Connection GAS Connection Connection to LPG Ventilation of roomsDischarge of combustion products Removing the hob Adjustment for Different Types of GAS1700 240 236 Double Internal 380 Crown External 1200 Nozzle replacement and primary air adjustmentNatural gas G20 2.0 kPa G30/G31 G110 KPa Regulation of primary airTown gas G110 0.8 kPa G20Final Operations Regulation of turndown rate for natural gas or town gasRegulation of turndown rate for LPG This must be done by a qualified technician Arrangement of the burners on the hobLubrication of gas taps BurnersUsing the HOB Instructions for the userIgnition of the burners Practical advice for using the burners Diameter of the pansBurners Min. and max. in cm Cleaning and Maintenance CleaningCleaning of cooking hob components Cover Cod /B