Instructions for the installer
5ADJUSTMENT FOR DIFFERENT TYPES OF GAS
Before performing any cleaning or maintenance work, disconnect the appliance from the electrical socket.
A label on the bottom enclosure of the hob declares for which type of gas the appliance has been adjusted. For functioning with other types of gas the nozzles must be replaced and the primary air adjusted.
To replace the nozzles and regulate the burners, operate as described in the following paragraph.
5.1Removing the hob
1.Remove all the knobs, the grids, the burner caps and the flame- caps;
2.Remove the screws and the nuts A that secure the burner supports;
3.Remove plates B;
4.Lift the hob from its seat;
5.Replace the burner nozzles in accordance with the relevant gas table;
6.adjust the primary air as described in paragraph “5.2 Nozzle replacement and primary air adjustment
10