Smeg ST1124 Washing programs, Table for Certification Bodies, Reference standard

Page 7

User instructions

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

TABLE FOR CERTIFICATION BODIES

 

Reference standard

EN 50242

Reference program

Load

Type of detergent

Amount of detergent

Rinse aid setting

BIO

12place-settings

B

30 g

Depending on the model 3/4 or 4/6

CANCELLING THE CURRENT PROGRAM

•To cancel the currently selected program, open the door and hold down the PROGRAM SELECTION (3) button for a few seconds until the indicator lights for programs 4 and 5 illuminate simultaneously (the word "end" is displayed on the window).

•Close the door.

•After approximately 1 minute the dishwasher will advance to the end of cycle.

CHANGING THE PROGRAM

To change the program in progress, simply open the door and select a new program. When the door is closed the dishwasher will automatically select the new program.

1.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

22

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controlsExtra Program Light Setting the Washing Program and Switching onProgramme Number & Symbol Minutes Water Reference standard Cancelling the Current ProgramWashing programs Table for Certification BodiesExtra Programs Selecting Half Load Wash on some models onlyOption Button Delaying the ProgramElectronic Setting models with display Adjusting the Water Softening SystemWater Hardness Table Switch Setting models without display Removing the Dishes END of CycleFault Description TroubleshootingWater intake system malfunction Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Water supply connection Installation and hook-upElectrical connection Connecting to the Water SupplyDrain Connection Operating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLoading the Lower Basket Lower BasketCutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketPush-button version Avoid the use of acidic or abrasive detergents Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray ArmsProlonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Technical Data 598
Top Page Image Contents