Instructions for the installer
8.INSTALLING THE APPLIANCE
8.1Positioning in the counter top
This is a class 3 appliance.
The following operation requires building and/or carpentry work, therefore it must be carried out by a skilled technician.
Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C).
8.1.1 Fixing to the supporting structure
Create an opening in the counter top
with the dimensions shown in the figure, keeping a minimum distance of 50 mm from the rear edge. This appliance can be mounted against walls higher than the work surface on condition that a distance of "X" be
kept between the appliance and the wall as shown in the figure so as to
avoid damage from overheating.
Make sure that there is a minimum of 750 mm (Fig1) between the hob and any shelf that may be installed directly above it.
Carefully position the supplied insulating seal (E) on the outer perimeter of the hole made in the counter top, trying to make it stick on the entire surface by applying light pressure on it with your hands. Once the hob is fixed in position remove excess material using a cutter.
30