Smeg PS906 manual Instructions for the installer

Page 14

Instructions for the installer

If a plug and socket connection is being used make sure that the plug and socket are compatible. Avoid use of adapters and shunts as these could cause overheating and burns.

Operation at 220-240 V~: use a three-core cable of the type

H05V2V2-F (3 x 1.5 mm2 cable for

electric hobs and 3 x 0.75 mm2 cable for gas hobs)

The end to be connected to the appliance must be an earth wire (yellow-green) at least 20 mm longer.

The manufacturer declines all responsibility for damage to persons or

things caused by the non-observance of the above prescriptions or deriving from tampering with any part of the appliance.

35

Image 14
Contents Contents Precautions for use Instructions for USEInstructions for disposal Instructions for Disposal OUR Environmental CareSafety instructions Safety InstructionsKnow Your Appliance Before InstallationInstructions for the user Using the HOB Gas hobPractical tips for using the burners Pan diametersCleaning the gas components Cleaning and MaintenanceCleaning stainless steel Ordinary daily cleaningPositioning in the counter top Instructions for the installerInstalling the Appliance Fixing to the supporting structureInstructions for the installer Fixing to the electric model support structure Instructions for the installer Electrical connection Do not remove this plate for any reasonInstructions for the installer Connection with rigid copper GAS ConnectionConnection to liquid gas Connection with flexible steelRoom ventilation Extraction of the products of combustionReplacement of nozzles on the cooker hob Adaptation to Different Types of GASBurner and nozzle characteristics table Liquid GAS G30/G31 28/37 mbarFinal Operations for GAS Appliances Adjusting the minimum for town and natural gasAdjusting the minimum for liquid gas Lubrication of gas taps