Smeg LVF32G instruction manual Using the rinse aid and detergent dispensers, Adding the Rinse AID

Page 14

User instructions

4.2Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right.

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required.

ADDING THE RINSE AID

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.

Open the door.

Rotate the container cap anticlockwise by 1/4 of a turn and remove it.

Add the rinse aid until the container is full (approximately 140 cc). The optical level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the optical level indicator becomes clear again, or when the rinse aid warning light illuminates.

Replace the cover and turn it in a clockwise direction.

Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam.

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position.

The setting must be increased when the washed dishes appear dull or have circular staining.

To adjust the rinse aid setting, rotate the dispenser cap through a quarter turn in an anticlockwise direction and remove it.

Then use a screwdriver to rotate the rinse aid selector to the desired position.

Replace the cap, turning it clockwise.

The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains.

If, on the other hand, the dishes are sticky or have white streaks, it is necessary to reduce the rinse aid setting.

36

Image 14
Contents Dishwasher Italiano English Contents Safety instructions Safety and operating instructionsAquastop Models Water supply connection Installation instructions Installation and hook-upConnecting to the Water Supply Drain Connection Installation instructionsElectrical connection User instructions Description of the controls Front panelTable of Programs Setting the Washing ProgramUser instructions Washing programs Half Load Wash SettingCancelling the Current Program Table for Certification Bodies END of Cycle Program Delay Changing the Program Removing the DishesUsing the water softening system User instructions Operating instructionsAdjusting the Water Softening System Water Hardness Table SettingAdding the Rinse AID Using the rinse aid and detergent dispensersAdjusting the Rinse AID Dispenser Setting Adding the Detergent General warnings and recommendations Loading the Lower Basket Using the basketsLower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketCleaning the Spray Arms User instructions Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Orbital Version Spray ARMCleaning the Filter Unit Prolonged DisuseTroubleshooting Minor Problems Technical Data Page