Smeg DF410BL1 Cleaning and maintenance, Cleaning the Water Intake Filter, Cleaning the Spray Arms

Page 27

User instructions

5. Cleaning and maintenance

Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device.

5.1 General warnings and recommendations

Avoid the use of acidic or abrasive detergents.

Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces.

Clean the door gaskets with a damp sponge.

Periodically (once or twice a year) it is advisable to clean the tank and gaskets, using a soft cloth and water to remove any deposits.

CLEANING THE WATER INTAKE FILTER

The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically.

After having closed the water supply tap, unscrew the end of the water intake hose, remove the filter A and clean it delicately under running water. Reassemble filter A in its seat and carefully screw the water intake hose back into position.

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded.

To remove the upper spray arm, unscrew locking ring R.

26

Image 27
Contents Guide for Using the Dishwasher and the Washing Programs Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Water supply connection Installation and hook-upDrain Connection Connecting to the Water SupplyIf the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only User instructionsDescription of the controls Front panelInformation display Only run the soak program with half loads Washing programs LightingProgramming Interrupting a Program Selection ProgramStart Program END ProgramStopping a Program To Change a ProgramUser instructions Removing the Dishes To Save on ENERGY! … and Protect the EnvironmentOperating instructions Using the water softening systemUser instructions Water Hardness Table Using the rinse aid and detergent dispensersAdding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions Using the baskets Lower BasketLoading the Lower Basket Upper Basket Cutlery BasketLoading the Upper Basket Adjusting the Upper BasketCleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Cleaning the Filter Unit Cleaning the Spray ARM, Travelling VersionGeneral Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Troubleshooting Technical Data