Smeg DF410BL1 instruction manual Technical Data

Page 32

User instructions

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height

Capacity

Water supply pressure

Electrical characteristics

447 ⎟ 449 mm

600 mm

from 850 mm to 870 mm

10 Standard place settings

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

See rating plate

31

Image 32

Contents Guide for Using the Dishwasher and the Washing Programs Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up Water supply connectionConnecting to the Water Supply Drain ConnectionElectrical connection and precautions If the Appliance is Provided with a Plugless Supply CordUser instructions For Great Britain onlyInformation display Description of the controlsFront panel Only run the soak program with half loads Programming Washing programsLighting Selection Program Start ProgramEND Program Interrupting a ProgramTo Change a Program Stopping a ProgramUser instructions To Save on ENERGY! … and Protect the Environment Removing the DishesUsing the water softening system Operating instructionsUser instructions Using the rinse aid and detergent dispensers Water Hardness TableAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent General warnings and recommendations ProductsUser instructions Loading the Lower Basket Using the basketsLower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketCleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray ARM, Travelling Version Cleaning the Filter UnitGeneral Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Troubleshooting Technical Data