Smeg DF410BL1 Cleaning the Spray ARM, Travelling Version, Cleaning the Filter Unit

User instructions

CLEANING THE SPRAY ARM, TRAVELLING VERSION

To remove the TRAVELLING spray arm, take hold of it and raise it to release both the spray arm and the pipe from the tank, then detach the spray arm from the pipe. Wash both the pipe and the spray arm in running water, re-attach the spray arm to the pipe and return the assembly to the seat provided in the tank.

Once the assembly has been put back in place, check that the spray arm turns freely (turn through a couple of revolutions by hand) and that the pipe is able to travel without impediments. Otherwise, check that it has been fitted correctly.

CLEANING THE FILTER UNIT

•The central filter H should be inspected regularly and cleaned if necessary. To remove it, take hold of the handle, turn anti-clockwise and lift.

•Press the central filter H from below to extract it from the micro-filter.

•Separate the two parts of the plastic filter by pressing the body of the filter in the zone shown by the arrows.

•Remove the central filter by lifting it.

27