Smeg GCO90XG manual Instructions for the installer, Regulation for LPG

Contents Contents THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2. POSITIONING OF HOB Instructions for the installer2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products 5. ADAPTATION TO DIFFERENT TYPES OF GAS 5.1 Removing the hob5.2 Regulation for LPG Rated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW5.4 Regulation for town gas 5.3 Regulation for natural gasheating 5.5 Regulation of primary air Referred to distance “X” in mm6.1 Regulation of minimum for natural gas 6. FINAL OPERATIONS6.2 Regulation of minimum for LPG This must be done by a qualified technician 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps BURNERS7. USING THE HOB Instructions for the user7.4 Using a griddle plate 7.2 Practical advice for using the burners7.3 Diameter of containers 7.5 Electric elements 7.5.2 Using the electric elements7.5.1 Turning on electric elements To use correctly remember to Before any intervention, disconnect the power supply of the device 8. CLEANING AND MAINTENANCENever use a steam jet to clean the appliance 8.1.1 Regular daily cleaning of the hob8.2.2 The electric element 8.2.1 Ignition plugs and safety devicesCAUTION do not wash these components in a dishwasher 8.2.3 The cover